Brief introduction: The X- γ radiation air absorption dosimeter for REN500L environmental monitoring uses a large size and high sensitivity scintillator as a detector, and the reaction rate is fast. The mainframe built-in detector allows the whole machine to have a wider range of measurements. The instrument meets the requirements of the medium and low dose portion of the Environmental Surface γ radiation dose rate. This instrument not only can measure high energy and low energy γ-ray, but also can accurately measure low energy X-ray. It has good energy response characteristic. In addition, the stored data can be read out and analyzed by RenRiRate dose-rate management software. The instrument is widely used in environmental protection, metallurgy, petrochemical, health and epidemic prevention, import and export commodity inspection, radioactive laboratory, scrap iron and steel, Xray plant, accelerator, commodity inspection, various radioactive workplaces and other occasions. Functional features: 1. Super-large composite plastic scintillator with high sensitivity and fast response speed 2, the host built-in detector, so that the whole machine has a wider range. 3. Full Chinese menu-type operation interface. 4, digital LCD LCD display, highlight backlight function. 5. Built in 800 pieces of dose rate storage data, which can be viewed at any time without loss after power failure. 6. USB data interface, which can upload data to the computer. 7. Dose rate and cumulative dose can be measured. 8. Dose-rate threshold alarm function. 9, blocking alarm, detector fault alarm function. 10. Real-time display of battery power. 11. Standard configuration: RenRiRate software 12, suitable for low range, environmental level radiation detection. Technical specifications: 1, Detector: φ 90 × 90 mm, compound plastic scintillation crystal 2. Measurement range: dose rate: 1nSv/h ~ 200.00 Sv/h Cumulative dose: 0.00 microns to 9999 microns 3, sensitivity: 1 micsv /h greater than 2000CPS 4. Energy response: 30Kev ~ 3Mev 5. Relative error: less than or equal to 10% 6, the host built-in detector range: 1 mu Sv/h~100mSv/h 7. Measurement time: 1 ~ 120 seconds programmable setting 8, alarm threshold: 0.25, 2.5, 10, 20 (micsv /h) or set yourself 9, units: dose rate: mu Sv/h, mu Gy/h;Cumulative dose: nSv;Count rate: CPS 10. Communication: USB communication interface, the instrument can store 800 pieces of data, which can be exported to RenriRate software 11. RenriRate radiation dose management software provides text table and curve graph display 12, using the environment: temperature 15 ℃ to + 50 ℃, relative humidity 95% or less (under 40 ℃ temperature) 13. Power and power consumption: 2 standard no.5 batteries;Power consumption of the whole machine is no more than 100mW (excluding backlight power consumption of the display) 14. Weight: about 2.5kg; 15. Dimensions: main engine: 140 × 80 × 37 (cm);: φ 104 × 380 mm
Brief introduction: The X- γ radiation air absorption dosimeter for REN500L environmental monitoring uses a large size and high sensitivity scintillator as a detector, and the reaction rate is fast. The mainframe built-in detector allows the whole machine to have a wider range of measurements. The instrument meets the requirements of the medium and low dose portion of the Environmental Surface γ radiation dose rate. This instrument not only can measure high energy and low energy γ-ray, but also can accurately measure low energy X-ray. It has good energy response characteristic. In addition, the stored data can be read out and analyzed by RenRiRate dose-rate management software. The instrument is widely used in environmental protection, metallurgy, petrochemical, health and epidemic prevention, import and export commodity inspection, radioactive laboratory, scrap iron and steel, Xray plant, accelerator, commodity inspection, various radioactive workplaces and other occasions.
