RC-3 dissolution tester Introduction: The dissolution tester is used to check the dissolution rate and degree of drugs from tablets, capsules and other solid preparations in the specified solvent. Applicable standard: Pharmacopoeia of the People's Republic of China, 2020 edition. Industry standard Drug Dissolution Tester. characteristic: 1. Three cups and three strokes, one word and one row. 2. The handpiece is turned manually, which is stable and flexible. 3. Imported SUS316L stainless steel is used for turning basket and paddle. 4. The magnetic water pump circulating water homogenization system is adopted, and the water bath temperature is uniform. 5. Fully automatic and intelligent control of temperature, speed and time. 6. Parameters can be preset at will; Time sharing display of preset and real-time values. 7. Automation, automatic detection, automatic diagnosis and automatic alarm. Technical parameters: Speed regulation range: (20~200) rpm Speed regulation accuracy: ± 2 rpm Temperature control range: (room temperature~45.0) ℃ Temperature control accuracy: ± 0.3 ℃ Timing range: (5-900) min, six points in total Timing accuracy: ± 0.3% Swing amplitude of basket: ± 1mm Swing amplitude of propeller rod: ± 0.5mm Eccentricity of rotating shaft: ± 2.0mm Electric heater power: 500W Continuous working time: more than 24 hours Power supply: 220V ／ 50Hz Power: 600W Overall dimension: (46 × 30 × 48）ｃｍ３ Weight: 27kg
Introduction: The dissolution tester is used to check the dissolution rate and degree of drugs from tablets, capsules and other solid preparations in the specified solvent. Applicable standard: Pharmacopoeia of the People's Republic of China, 2020 edition. Industry standard Drug Dissolution Tester.
