RB-300 rigid foam plastic compression creep tester Introduction: This machine is used to measure the yield compression/bending characteristics of hard foam under the condition of high temperature air. It is a domestic testing equipment that can test the thermal compression/bending deformation characteristics of hard foam; Compliant with DIN-53424 and GBT 20672-2006 standards. This device uses an intelligent controller to control the temperature, and the temperature control effect is very ideal; The deformation measurement device adopts a high-precision grating micrometer to make the measurement values more accurate; The measurement error can be controlled within a range of 0.2 thousandths of a millimeter; Real time display of color test curves and deformation of samples during the heating process, achieving automated temperature control, deformation collection, and process control of the entire test process, and automatically recording and saving test data to form a test report; The whole machine has high quality and reliability, which greatly facilitates the process of installing samples for operators. Technical parameters: Heating method: Air bath heating Number of test routes: Three routes Test temperature: Room temperature -300 ° C Temperature fluctuation difference of heating box: ± 2 ° C Temperature rise rate: 50 ± 3 ℃/h and 10 ± 2 ℃/12min Temperature measurement accuracy: 0.1 ° CC Deformation measurement accuracy: 0.002mm Sample size: 50 * 50 * 50mm/40 * 40 * 20mm Pressure plate diameter: 50mm * 50mm shape, three pieces Recommended test load: 0-1MPa Heating space: 350mm × 400mm × 400mm
Introduction: This machine is used to measure the yield compression/bending characteristics of hard foam under the condition of high temperature air. It is a domestic testing equipment that can test the thermal compression/bending deformation characteristics of hard foam; Compliant with DIN-53424 and GBT 20672-2006 standards. This device uses an intelligent controller to control the temperature, and the temperature control effect is very ideal; The deformation measurement device adopts a high-precision grating micrometer to make the measurement values more accurate; The measurement error can be controlled within a range of 0.2 thousandths of a millimeter; Real time display of color test curves and deformation of samples during the heating process, achieving automated temperature control, deformation collection, and process control of the entire test process, and automatically recording and saving test data to form a test report; The whole machine has high quality and reliability, which greatly facilitates the process of installing samples for operators.
