QZDC-A Multi Parameter Output Sensor Introduction: The QZDC-A multi parameter output sensor is a high-quality sensor with independent intellectual property rights jointly developed by the Institute of Engineering Mechanics of China Earthquake Administration and our company. This series of sensors can output signals of three parameters: vibration acceleration, vibration displacement, and dynamic tilt according to customer needs. The multi parameter output sensor can be used in conjunction with our G01NET series acquisition instrument, as well as other acquisition instruments that collect voltage signals. The QZDC series multi parameter output sensor adopts dynamic coil transduction and servo feedback technology to achieve synchronous measurement of three parameters: vibration displacement, vibration acceleration, and dynamic tilt. Mainly used for low-frequency dynamic vibration displacement, vibration acceleration, dynamic inclination measurement and monitoring of onshore and offshore wind power towers, bridges, high-rise buildings, docks, dam bodies, offshore platforms and other buildings. characteristic: 1. Multi parameter output. 2. High resolution. 3. High sensitivity. 4. High reliability and long service life. 5. Large range. 6. Easy to install. 7. High waterproof rating. Technical parameters: Model: QZDC-A Output parameters: Two horizontal vibration displacements, bidirectional dynamic tilt Sensitivity: Displacement: 2.5V/m; Acceleration: 1~3V * s ^ 2/m; Tilt angle: 0.28V/° Range: Displacement: ± 2000mm; Acceleration: ± 2g; Tilt angle: ± 15 ° Passband (Hz, dB): displacement: 0.1~35; Acceleration: 0~200; Tilt angle: 0~8 Resolution: Displacement: 0.1mm; Acceleration: 0.000002g; Tilt angle: 0.001 ° Waterproof rating: IP66 Power supply: DC12V, power consumption 1 watt Usage environment: Temperature: -35 ℃~+70 ℃; Humidity: less than 90% Dimensions (L * W * H, mm）： 200*150*143mm； Distance between hole centers: 180 * 130mm; Installation hole diameter: 12mm Quality: 2.7KG
Introduction: The QZDC-A multi parameter output sensor is a high-quality sensor with independent intellectual property rights jointly developed by the Institute of Engineering Mechanics of China Earthquake Administration and our company. This series of sensors can output signals of three parameters: vibration acceleration, vibration displacement, and dynamic tilt according to customer needs. The multi parameter output sensor can be used in conjunction with our G01NET series acquisition instrument, as well as other acquisition instruments that collect voltage signals. The QZDC series multi parameter output sensor adopts dynamic coil transduction and servo feedback technology to achieve synchronous measurement of three parameters: vibration displacement, vibration acceleration, and dynamic tilt. Mainly used for low-frequency dynamic vibration displacement, vibration acceleration, dynamic inclination measurement and monitoring of onshore and offshore wind power towers, bridges, high-rise buildings, docks, dam bodies, offshore platforms and other buildings.
