Brief introduction: Heat insulation aluminum high temperature tensile shear torsion testing machine is suitable for the whole material with high and low temperature tensile within 30 kn, peel, tear, torsion, compression, bending, shear, Pierce and low cycle fatigue mechanics performance test of the project; Can meet the GB, ISO, JIS, ASTM, DIN and other international standards and industry standards; When using the normal temperature test, high and low temperature box can be removed increased use of space and convenience of other test purpose. Technical parameters: Temperature range: 7 ℃ ~ at room temperature to 350 ℃ (constant temperature 350 ℃) Speed: p 5 ℃ / min Temperature control table resolution: 0.1 ℃ Maximum load: 0 to 30 kn arbitrary choice Load yuan precision: 0.01% Precision: < plus or minus 1% or < plus or minus 0.5% Operating mode: full computer control, for control both Effective width: 420 mm Effective test: according to the need can be raised about 800 mm The test speed: 0.01 to 500 mm/min (or less than 1000 mm) Speed precision; Plus or minus 0.5% Displacement measurement accuracy: + / - 0.5% Deformation measurement accuracy: + / - 0.5% Safety device: electronic limit protection, emergency stop The machine weight: 265 kg
Brief introduction: Heat insulation aluminum high temperature tensile shear torsion testing machine is suitable for the whole material with high and low temperature tensile within 30 kn, peel, tear, torsion, compression, bending, shear, Pierce and low cycle fatigue mechanics performance test of the project; Can meet the GB, ISO, JIS, ASTM, DIN and other international standards and industry standards; When using the normal temperature test, high and low temperature box can be removed increased use of space and convenience of other test purpose.
