Position: Home > > Lab general equipment > Cleaning / disinfection equipment > Glove box > QFX series organic glass inert gas operation box for Toxic gas

QFX series organic glass inert gas operation box for Toxic gas

Product ID:SYQXXDsht011

Price: Please inquire PDF Format
Supply Ability:20SETS/MON
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Model NumberQFX series
    Brand NameNJKX
    Payment TermsT/T, paypal
    Introduction:
    The inert gas operation box (also called the inert gas protection box) has the same effect as the vacuum glove box except that the vacuum degree of the box does not meet the requirements of the vacuum glove box. It is often effective for toxic gases such as nitric acid and flowing acid. Especially good, and there is a considerable price. There are two glove operation ports in front of the inert gas operation box (QFX-3 inert gas operation box has three glove ports). The operator can clearly observe the operation process inside the glove box, so that the entire operation process is intuitively displayed in the operation. In front of the person, a vacuum ball valve and a vacuum pressure gauge are provided on the transition chamber. According to the experimental requirements, the operating box is evacuated, inflated and watered through the ball valve.
    Features:
    1. The glove box is made of high transparent polypropylene ester, which can prevent air leakage and has a wide viewing angle.
    2. The interior of the box is equipped with lights and multi-hole power sockets, and UV lamps can be installed as required.
    3, the operation of the box using thick latex gloves sealed and reliable, high sensitivity.
    4. The design of the transition chamber sealing device is novel, reliable and easy to open.
    5, the box reserves a standard interface to facilitate the entry and exit of gas and liquid
    6, special specifications of inert gas operation box can be customized according to need.
    Technical Parameters:
    QFX-1
    Box size (unit: mm): 600×500×550
    Pressure holding time: more than 10 hours
    Glove hole diameter: Φ145mm or more
    Cabinet door diameter: Φ220
    Use gas: optional
    QFX-2
    Box size (unit: mm): 800×650×700
    Pressure holding time: more than 10 hours
    Glove hole diameter: Φ145mm or more
    Door diameter: Φ280
    Use gas: optional
    QFX-3
    Box size (unit: mm): 1200×650×1000
    Pressure holding time: more than 10 hours
    Glove hole diameter: Φ145mm or more
    Door diameter: Φ340
    Use gas: optional

  • Introduction:
    The inert gas operation box (also called the inert gas protection box) has the same effect as the vacuum glove box except that the vacuum degree of the box does not meet the requirements of the vacuum glove box. It is often effective for toxic gases such as nitric acid and flowing acid. Especially good, and there is a considerable price. There are two glove operation ports in front of the inert gas operation box (QFX-3 inert gas operation box has three glove ports). The operator can clearly observe the operation process inside the glove box, so that the entire operation process is intuitively displayed in the operation. In front of the person, a vacuum ball valve and a vacuum pressure gauge are provided on the transition chamber. According to the experimental requirements, the operating box is evacuated, inflated and watered through the ball valve.
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
18620722006
instruments@instrumentstrade.com