Introduction: Purpose of laboratory bottle washer: it is used for laboratory cleaning, moistening, drying triangular bottles, volumetric bottles, test tubes, beakers, pipettes, chromatographic injection bottles and other conventional experimental utensils, and can be used in all relevant industry laboratories that need cleaning utensils; characteristic: 1. Integrated design of the whole machine, which can be installed independently without the assistance of other external devices. At most 4 5L detergent barrels are built into the instrument; 2. The control panel adopts full-color protection light touch control system, special glass panel protection, touch the button to set; 3. A variety of cleaning programs are built in, including 30 standard programs such as fast, grease, biology, lubricating oil, etc., and 120 user-defined programs. In each custom program, users can adjust cleaning temperature, time, cleaning agent channel and other cleaning parameters and save them automatically. Each program has independent codes and parameters, which can run independently without any combination. It can be operated independently to cope with extremely trace amounts Cleaning can provide more than 27 times of washing, and provide three-level password management system; 4. Accurate control of inflow flow and dynamic water injection system make users not need to worry about the interruption of cleaning caused by temporary water cut-off and water supply. After water supply, the instrument will automatically water in and run the cleaning program; 5. "Black box" monitoring can automatically record whether each electrical component is in normal operation during the whole cleaning process, and automatically judge whether the cleaning is completed according to the set process. In case of failure, the "black box" data can be easily accessed to accurately determine the location of the fault Technical parameters: Power supply part: voltage 380V50Hz, peak power ≤ 10kW, hot air power: 3kw Material and appearance: 316L stainless steel liner (passivated) and 304 stainless steel shell, with super corrosion resistance Control system: microcomputer chip control, imported chip from USA, photoelectric isolation circuit design; Detergent distribution pump: more than 2 peristaltic pumps;
Pure water booster pump: built-in, no need to consider pure water pressure; Soft start frequency conversion control of circulating pump: the circulating pump has 0-600l / min variable frequency soft start function, which can adjust the spray pressure to ensure the cleaning effect and avoid the damage to the utensils caused by excessive pressure at the moment of pump start-up and shut-down; Water supply mode: the cleaning water enters the inner cavity from the central water supply device on the top of the instrument to supply water for the cleaning basket. The cleaning basket takes water from the top water supply device, and then supplies water to the cleaning nozzles around from the middle of the basket to ensure the consistency of the water pressure of each cleaning nozzle. After the cleaning, the water stored in the pipeline quickly returns to the water tank through the drainage device under the action of gravity, so as to ensure rapid water discharge Speed and thoroughness; Hidden heating: the water heating coil is hidden inside the water tank and not directly exposed on the bottom plate, so as to prevent the heating pipe from being exposed to dry burning during the cleaning process; Data transmission system: RS232 interface, connected to the pin printer to store valid data, which can be exported, stored and saved The real cleaning data can be queried, traceable and repeatable Safety protection system: electronic safety lock, mechanical safety device: automatic lock during the operation of the instrument to prevent misopening operation and avoid causing hot steam injury; over temperature protection, overflow protection, multiple filter screen protection, liquid shortage reminder function of cleaning agent; The water heating coil is hidden inside the water tank and not directly exposed on the bottom plate to prevent the heating pipe from being exposed to dry burning during the cleaning process; Drying system: pipeline injection drying system: Fan Power: 0.3kw, hot air heating power: 3kw, temperature: room temperature - 120 ℃, time: 0-300min; High efficiency HEPA filter, dry air through the injection basket nozzle directly to the inside and outside of the container, can thoroughly dry the inside and outside of the container; The double spray steam condensation system is used for steam condensation and automatic discharge of cooling water without ventilation pipe. The condenser is made of high-quality stainless steel. The system can quickly and efficiently dry the glassware and cool the glassware before the end of the cycle, so that users can safely take out the glassware from the bottle washer; Cleaning chamber capacity: the inner cavity volume is 223l, which can be used to place double-layer injection basket and three-layer Petri dish cleaning basket; Dimensions of bottle washing machine (L * w * h): 1015 * 779 * 1266 (mm)
Introduction: Purpose of laboratory bottle washer: it is used for laboratory cleaning, moistening, drying triangular bottles, volumetric bottles, test tubes, beakers, pipettes, chromatographic injection bottles and other conventional experimental utensils, and can be used in all relevant industry laboratories that need cleaning utensils;
