PXSYD-4A low temperature kinematic viscosity tester Introduction: Low-temperature kinematic viscosity tester The manufacture of this instrument complies with the requirements of the People's Republic of China industry standard SY/T 5651 "Technical Conditions for Petroleum Products Kinematic Viscosity Tester", and is applicable to the Kinematic Viscosity of Petroleum Products according to the People's Republic of China GB/T 265. Determination of the kinematic viscosity of liquid petroleum products (referred to as Newtonian liquids) under a constant temperature condition. Features: 1. Adopt intelligent temperature controller, which has rapid temperature control, fast response, small overshoot and temperature control accuracy of ±0.1 °C. 2, the use of imported acrylic glass, good insulation performance, the sample is clear. 3, using the desktop, the instrument is good overall, easy to use. 4, using electric stirring device, the temperature inside the bathtub is even. The great features of this instrument are: full spray plastic treatment, durable; high-precision temperature control instrument, accurate temperature control; special type of Pinus capillary viscometer. Technical Parameters Working power: AC (220 ± 10%) V, 50Hz ± 5%; Heating power: 1300W; Stirring motor: power 6W; speed 1200r/min; Temperature control mode: Microcomputer temperature control, PID adjustment Temperature measurement range: 0 ~ 100 ° C; Temperature control accuracy: ±0.1 °C; Thermostatic bath: capacity, 22L Liner volume: diameter 300mmx depth 400mm Opening size: diameter 65*4 Operating environment: ambient temperature -10 ° C ~ +35 ° C, relative humidity <85%; Temperature sensor: Industrial platinum resistance, its graduation number is Pt100; Power consumption of the whole machine: no more than 1800W; Capillary viscometer: A total of 4, 4 (moving viscometer 0.6, 0.8, 1.0, 1.2mm according to customer needs) ) Dimensions: 900mm × 400mm × 580mm (length × width × height, including bathtub, etc.)
Introduction: Low-temperature kinematic viscosity tester The manufacture of this instrument complies with the requirements of the People's Republic of China industry standard SY/T 5651 "Technical Conditions for Petroleum Products Kinematic Viscosity Tester", and is applicable to the Kinematic Viscosity of Petroleum Products according to the People's Republic of China GB/T 265. Determination of the kinematic viscosity of liquid petroleum products (referred to as Newtonian liquids) under a constant temperature condition.
