PT-509A-1 self-adhesive roller compactor Introduction:
PT-509A automatic rolling roller machine mainly assists in the preparation of samples for adhesive test of adhesive tape, protective film, label, release film and other products. It can flatten and evenly adhere the sample at a fixed pressure and speed. On the test board. Standards compliant:
CNS 11888-2014 Pressure-sensitive adhesive tape and adhesive film test method Features:
1. Test plate placement groove: The test plate placement groove adopts a concave design to ensure that the sample plate is always fixed during the rolling process, ensuring the fitting effect; for the convenience of the test plate, at the edge The holes are designed on both sides.
2 Roller: It is made of high quality 304 stainless steel material, which is precision machined to ensure no rust for life; the surface is coated with rubber of about 6mm thickness according to standard requirements, hardness is 80 Shore A, no convex and concave deviation, weight is 2000g.
3. Touch screen: In order to reduce the cumbersome operation of the customer and upgrade the machine grade, the control system of the machine is specially changed to the touch screen control, and the number of times of rolling and the speed of rolling can be quickly input.
4. Imported ball screw: It adopts HIWIN screw, which has the advantages of low frictional resistance, high sensitivity and no chattering during starting, ensuring repeated positioning accuracy and reducing vibration interference to the sensor.
5. DC stepping motor: This instrument uses Leisai motor as the power source of the instrument, and eliminates noise generation from the source for life.
6. Multi-layer spray of fuselage: The fuselage of the machine adopts multi-layer spray treatment process to ensure that the appearance is still new and the surface is more wear-resistant after many years of use. Technical Parameters:
Roller load: 2000g ± 50g
Rolling speed: 300mm/min, 600m/min (can be set)
Roller size: ¢84mm×width 45mm
Rubber hardness: Hs80±5
Fitting station: 1 group, 2 groups, 3 groups, 4 groups
Number of rolling times: 1 time, 2 times, 3 times (can be set)
Rolling stroke: can be set
Controller: touch screen control
Machine weight: about 18kg
Power source: 1∮ AC220V 50/60Hz 2A
Introduction:
PT-509A automatic rolling roller machine mainly assists in the preparation of samples for adhesive test of adhesive tape, protective film, label, release film and other products. It can flatten and evenly adhere the sample at a fixed pressure and speed. On the test board. Standards compliant:
CNS 11888-2014 Pressure-sensitive adhesive tape and adhesive film test method
