PT-501 microcomputer type peeling force testing machine
Introduction: PT-501B is a professional application for adhesives, adhesive tapes, stickers, medical patches, protective films, release paper, composite film, artificial leather, woven bags, film, copper foil, aluminum foil, aluminum plastic film, paper , tensile testing machine for stripping and breaking of wire, rubber and other related products. With different fixtures, it can be used for tensile, compression, bending, peeling, holding, holding, fatigue, compression, shearing, tearing and other tests. Features: 1. The whole test process is controlled by microcomputer, and the load value, displacement value, deformation value and test speed are dynamically displayed in real time; 2. The data processing analysis is carried out by using a microcomputer, and the test results can be automatically saved. After the test is completed, the maximum force, hysteresis loop method, stepwise approximation method, non-proportional extension strength, tensile strength, compressive strength and elongation are automatically calculated. 3, all Chinese microcomputer controller, with strong data maximum, minimum, average, net energy, reentry energy, total energy, flexural modulus, breakpoint displacement x% load, breakpoint load X% displacement, etc. Wait. 4. Full-digital, three-closed (force, deformation, displacement) control system based on neuron adaptive PID algorithm, realizes full-digital three-closed control of force, deformation and displacement, and can automatically switch between control loops, and in various ways The test has no impact smoothing excessively when switching between; 5. It can control and maintain the rate of test force, deformation and displacement; 6. Online identification of test control parameters; 7, high precision data acquisition system, high resolution; 8, can set the number of decimal places, (two and three) physical units and password protection; 9. The test report language can be converted between Chinese and English; 10, overload emergency stop device, upper and lower stroke limit device, leakage automatic power off system, automatic breakpoint stop function. Technical Parameters: Capacity selection: 20N, 50N, 100N, 200N, 500N, 1KN, 2KN, 5KN (optional one) Power unit switching: kgf, gf, N, kN, lbf Stress unit switching: MPa, kPa, kgf/cm2, lbf/in2 Display: LCD display mode Power resolution: 1/250000 Power accuracy: ≤±0.5% Stroke resolution: 0.01mm Test stroke: 650mm (effective stroke) Test width: Ø120mm Test speed: 0.5～500mm/min adjustable Test machine function: display test value, maximum value, display displacement, 20 sets of test data can be stored, with print function Safety device: overload stop, emergency stop button, automatic shutdown of test piece destruction, automatic stop of upper and lower limit setting; overload protection, limit element protection device Machine size: 53 × 50 × 117cm (W × D × H) Transmission rod: high precision ball screw Power supply: AC220V/50HZ 10A Machine weight: about 65KG Standard configuration: 1 set of peel test fixture, 2KG standard manual roller, 5 test steel plates
PT-501B peeling force testing machine is a professional application for adhesives, adhesive tapes, stickers, medical patches, protective films, release paper, composite film, artificial leather, woven bags, film, copper foil, aluminum foil, aluminum Tensile testing machine for peeling and breaking of plastic film, paper, wire, rubber and other related products. PT-501B peeling force testing machine can be used for tensile, compressive, bending, peeling, holding, holding, fatigue, compression, shearing, tearing and other tests with different fixtures.
