PT-501-03 horizontal peeling force testing machine Introduction:
This machine is designed and developed for the test of adhesive products. It is controlled by microcomputer chip. It can do all kinds of sample tension and thrust test, full computer operation, automatic reset function, connect computer to output test pattern and table curve data as material test. in accordance with. Features:
1. Use PC and interface board to collect, save, process and print test results.
2. Calculate parameters such as minimum peel force, minimum peel force, average peel force, maximum deformation and peel strength;
3. It can perform curve processing, multi-sensor support, graphic image interface, flexible data processing, and MS-ACCESS database support to make the system more powerful. Technical Parameters:
Capacity selection: 20N
Display: computer display mode
Power resolution: 1/250,000
Power accuracy: ≤±0.5%
Stroke resolution: 0.001mm
Control method: full computer operation
Test stroke: 400mm
Test width: ¢140mm
Test speed: 0~500mm/min Computer setting, with fixture up and down quick adjustment button
Power unit conversion: kgf, N, Ibf, g, ton, Mpa
Stop mode: overload stop, emergency stop button, automatic shutdown of test piece destruction, automatic stop of upper and lower limit setting, automatic reset function
Machine power: Panasonic servo motor drive, synchronous wheel and precision ball screw drive
Power: 550W
Machine weight: about 55kg
Use electricity: 220V 50/60HZ 5A
Standard configuration: fixture 1 group, computer software, USB computer connection
Introduction:
This machine is designed and developed for the test of adhesive products. It is controlled by microcomputer chip. It can do all kinds of sample tension and thrust test, full computer operation, automatic reset function, connect computer to output test pattern and table curve data as material test. in accordance with.
