PrepP-01M Manual Hydraulic Press Introduction: The PrepP-01M manual hydraulic press can be used for X-ray fluorescence spectroscopy and infrared sample compression. It uses a pointer pressure gauge to monitor pressure changes in real-time, accurately and reliably. The device is compact and can be placed on a desktop, with a maximum pressure of up to 40T. characteristic: 1. The maximum pressure is 40T, which has sample preparation performance comparable to conventional presses. 2. Small size, can be placed on a desktop without the need for a dedicated sample room. 3. Portable and usable. 4. Efficient manual rod transmission design, labor-saving operation, and improving sample preparation efficiency. 5. Equipped with superhard wear-resistant special alloy steel molds, with a long service life, and a key part smoothness of Ra0.4, the sample preparation effect is stable. 6. Use ultra-thick steel plates and large diameter handwheels for more reliable performance. Technical parameters: Model: PrepP-01M Maximum pressure: 40T Working mode: manual Working pressure: 0-40T Working temperature requirement: 0-40 ℃ Sample preparation speed: 1 minute/batch Hydraulic oil: anti wear hydraulic oil 46# Size (L × W × H) ： 300 × two hundred and fifty × 600mm Net weight: 50kg
Introduction: The PrepP-01M manual hydraulic press can be used for X-ray fluorescence spectroscopy and infrared sample compression. It uses a pointer pressure gauge to monitor pressure changes in real-time, accurately and reliably. The device is compact and can be placed on a desktop, with a maximum pressure of up to 40T.
