PLS ViSun25 LED visible light solar simulation light source Introduction: PLS ViSun25 LED visible light solar simulation light source has a flowable fluid on the front surface to reduce the front surface temperature and avoid the influence of high front surface temperature on experimental results; The distributed light beads and special optical design around the light source give it high uniformity characteristics, providing illumination with uniformity better than 93% over a size range of 8 inches by 8 inches; And there is no ozone generated during the operation of the machine, which is safe and environmentally friendly. characteristic: 1. There is a fluid that can flow through the front surface to reduce the front surface temperature and avoid the influence of high front surface temperature on experimental results; 2. The initial maximum irradiance within the size range of 8 inches by 8 inches is ≥ 200 mW/cm ² (white light); Adopting water-cooled temperature control measures, with a wide range of output adjustment and high stability; 3. The distributed light beads and special optical design around the light source give it high uniformity, providing illumination with uniformity better than 93% over a size range of 8 inches by 8 inches; 4. The machine operates without generating ozone, ensuring safety and environmental protection; 5. The conventional wavelength band is white light (380~780 nm), and special wavelength bands (250 nm~1050 nm) can be customized according to actual usage needs. Technical parameters: Product Configuration: Host+Light Source Adjustable parameters: Adjustable optical power Host power: 1100 W (cooling 500 W+light source 600 W) Light source power: 600 W Rated voltage: 220 V 50 Hz Cooling method: liquid cooling Operating environment temperature/humidity: indoor, 0~30 ℃ (no condensation, no freezing) Storage environment temperature/humidity: -10~60 ℃, 30% RH~85% RH (non condensing, non freezing) Maximum output size of light source: 245 × 245 mm ² (8 × 8 inches with uniformity better than 90%) Peak wavelength: 380 ~ 780 nm
Introduction: PLS ViSun25 LED visible light solar simulation light source has a flowable fluid on the front surface to reduce the front surface temperature and avoid the influence of high front surface temperature on experimental results; The distributed light beads and special optical design around the light source give it high uniformity characteristics, providing illumination with uniformity better than 93% over a size range of 8 inches by 8 inches; And there is no ozone generated during the operation of the machine, which is safe and environmentally friendly.