PLS ViSun25 LED visible light solar simulation light source Introduction: PLS ViSun25 LED visible light solar simulation light source has a flowable fluid on the front surface to reduce the front surface temperature and avoid the influence of high front surface temperature on experimental results; The distributed light beads and special optical design around the light source give it high uniformity characteristics, providing illumination with uniformity better than 93% over a size range of 8 inches by 8 inches; And there is no ozone generated during the operation of the machine, which is safe and environmentally friendly. characteristic: 1. There is a fluid that can flow through the front surface to reduce the front surface temperature and avoid the influence of high front surface temperature on experimental results; 2. The initial maximum irradiance within the size range of 8 inches by 8 inches is ≥ 200 mW/cm ² (white light); Adopting water-cooled temperature control measures, with a wide range of output adjustment and high stability; 3. The distributed light beads and special optical design around the light source give it high uniformity, providing illumination with uniformity better than 93% over a size range of 8 inches by 8 inches; 4. The machine operates without generating ozone, ensuring safety and environmental protection; 5. The conventional wavelength band is white light (380~780 nm), and special wavelength bands (250 nm~1050 nm) can be customized according to actual usage needs. Application areas: Photovoltaic Science and Engineering: Testing of Solar Cell Characteristics, Thermal Conversion Utilization Materials Science: Material Aging Test Space Technology: Simulation Experiment of Spacecraft Environment Aerospace: Spacecraft Thermal Balance Experiment Biological Sciences: Agricultural and Forestry Cultivation, Plant Development, and Fine Variety Cultivation Optical components: assembly and bonding of lens modules, optical lenses, and infrared night vision devices Laboratory Materials: Polymer Chemistry, Semiconductor Materials, UV Curing Technical parameters: Product configuration: Host+Light source Adjustable parameters, adjustable optical power Host power 1100 W (cooling 500 W+light source 600 W) Light source power 600 W Rated voltage 220 V 50 Hz Cooling method: liquid cooling Indoor environment temperature/humidity, 0~30 ℃ (no condensation, no freezing) Storage environment temperature/humidity -10~60 ℃, 30% RH~85% RH (non condensing, non freezing) The maximum output size of the light source is 245 × 245 mm ² (8 × 8 inches with uniformity better than 90%) Peak wavelength 380~780 nm
Introduction: PLS ViSun25 LED visible light solar simulation light source has a flowable fluid on the front surface to reduce the front surface temperature and avoid the influence of high front surface temperature on experimental results; The distributed light beads and special optical design around the light source give it high uniformity characteristics, providing illumination with uniformity better than 93% over a size range of 8 inches by 8 inches; And there is no ozone generated during the operation of the machine, which is safe and environmentally friendly.
