Introduction: From the perspective of photocatalysis, the PLR-PTSRⅡ photothermal catalytic reactor takes the gas-solid phase photothermal coupling reaction into account, and the parameters can reach 550 ℃/1.6 MPa. It can be used for the research of gas-solid phase photocatalysis/thermocatalysis/photothermal catalytic reaction Liquid samples can be added or humidified for the reaction at the initial room temperature. It mainly focuses on flow differential reaction and takes into account the needs of closed integral reaction. It aims to provide a reaction test platform with controllable flow and pressure and light/thermal coupling, which can be used with the company's xenon light source. It is suitable for many photothermal catalytic reaction systems, such as photothermal CO2 reduction reaction, photo/thermal ammonia synthesis and photo/thermal catalytic oxidation. Features: 1. Using a special method, the material receives a high proportion of light; 2. Special structure design, good contact of reaction medium; 3. It can effectively send sampling, and can humidify water vapor to participate; 4. Conventional temperature monitoring, surface solutions can be provided! Technical parameter: System pressure: 1.6 MPa (gauge pressure); Flow pressure drop: 3.5 kPa (under 1 L/min flow conditions); Pressure measurement: 0~1.6 MPa (gauge pressure), ±0.25% FS; Pressure control range: 0.3~1.6 MPa; Flow control: 3~60 mL/min; Gas flow control range and accuracy: 4%~100% FS; Standard: CO, optional other gases); ±1% FS; Gas path selection: 1 path is standard, 2~3 paths are optional; Reaction temperature: ≥550 ℃ (electric heating, with N2 as the measuring gas) Heating method: electric heating, light heating, electro-optical coupling heating Temperature measurement: K type thermocouple, 0~900 ℃ Temperature control range: room temperature ~ 550 ℃ (with N2 as the measuring gas) Temperature control stability: room temperature ~ 650 ℃ (with N2 as the measuring gas) Measurement resolution: ±0.1 ℃ Photothermal coupling method: constant temperature, constant power, program temperature control (high 8 segments)
Introduction: From the perspective of photocatalysis, the PLR-PTSRⅡ photothermal catalytic reactor takes the gas-solid phase photothermal coupling reaction into account, and the parameters can reach 550 ℃/1.6 MPa. It can be used for the research of gas-solid phase photocatalysis/thermocatalysis/photothermal catalytic reaction Liquid samples can be added or humidified for the reaction at the initial room temperature. It mainly focuses on flow differential reaction and takes into account the needs of closed integral reaction. It aims to provide a reaction test platform with controllable flow and pressure and light/thermal coupling, which can be used with the company's xenon light source. It is suitable for many photothermal catalytic reaction systems, such as photothermal CO2 reduction reaction, photo/thermal ammonia synthesis and photo/thermal catalytic oxidation.