Introduction: The PL-DY1600 photochemical reactor (UV reactor, Photoreactor) is widely used in photochemical experiments, environmental protection and life sciences. Suitable for various types of photodecomposition experiments: acetaldehyde, ketone, halogen inducer, thio compound, paraffin, heterocyclic compound, aromatic point nucleus, conjugated diene, polyene compound, epoxy compound, ICH light stability test, simulation Solar ultraviolet aging test, catalyst preparation, photochemical synthesis of chemical products and photochemical degradation of pollutants. Therefore, it is an indispensable instrument for professional experimental teaching in the chemical industry, environmental protection field, scientific research institutes and colleges. Features: 1. The ultraviolet light reactor adopts multi-lamp ring illumination mode, and the sample receives light parallelism better. 2.photoreactor uses the voltage AC220V 50Hz, no high voltage is generated when lighting, safe and reliable. 3.photoreactor The center of the reaction chamber has its own magnetic stirrer, and the stirring speed is displayed (conventional type). 4. It can be equipped with multi-point agitator to achieve both revolution and agitation. 5. An automatic lifter can be added to lift the sample. 6. The lamp has a long life span of 3,000 hours (254nm lamp). 7.Photoreactor has a built-in air-cooling cycle to enhance the air flow of the reaction chamber. 8. Split the cover. 9. The lamps of different wavelengths can be replaced at any time to facilitate the comparison test. Optional (254nm, 313nm, 340nm, 352nm, 365nm, white light) 10. With a leaky drainage tube. Technical Parameters: Equipment model: PL-DY1600 photochemical reactor (UV photoreactor, Photoreactor) Working voltage: AC220V Number of lamps: 16 (can be customized 32) Lamp optional wavelength: 254nm, 313nm, 340nm, 352nm, 365nm, white light Lamp life: greater than 3000H Inner wall material: imported reflective material Reaction chamber diameter: 210mm Reaction chamber depth: 300mm Lamp brand: SANKYO, US GE, Osram and domestic brands Irradiation power: 4 blocks controllable (25%, 50%, 75%, 100%,) Cooling method: wind circulation Stirring method: magnetic stirring Mixing motor power: 25w Stirring speed: adjustable Mixing speed: 0-1800 rpm
Introduction: The PL-DY1600 photochemical reactor (UV reactor, Photoreactor) is widely used in photochemical experiments, environmental protection and life sciences. Suitable for various types of photodecomposition experiments: acetaldehyde, ketone, halogen inducer, thio compound, paraffin, heterocyclic compound, aromatic point nucleus, conjugated diene, polyene compound, epoxy compound, ICH light stability test, simulation Solar ultraviolet aging test, catalyst preparation, photochemical synthesis of chemical products and photochemical degradation of pollutants. Therefore, it is an indispensable instrument for professional experimental teaching in the chemical industry, environmental protection field, scientific research institutes and colleges.
