1
Analysis parameters: | Cu,Cr,Ni,Mn,Fe,As,Pb, Cd,Zn . etc | |
Instrument calibration: | Automatic calibration, user programmable settings | |
Detect range : | cu:0—80mg/L Cr:0—10mg/L Ni:0—40mg/L Mn:0—50mg/L Fe:0—50mg/L |
As:0—20mg/L Pb:0—10mg/L Cd:0—5mg/L Zn:0—30mg/L |
accuracy: | ±3% | |
Detect limit: | Cu:0.05mg/L Cr:0.01mg/L Ni:0.10mg/L Mn:0.025mg/L Fe:0.05mg/L |
As:0.05mg/L Pb:0.1mg/L Cd:0.025mg/L Zn:0.25mg/L |
Measurement temperature: | 5-50℃,95% Relative humidity, no condensation | |
Communication module: | RS232/RS485/4-20mA port,GPRS (optional ) | |
Power supply: | 220VAC , 50-60 Hz | |
Install method: | Hanging |