Introduction: As long as the hammer crusher organism, rotor system, hammerhead, sieve grate, transmission, power part. Body with two structural forms, one for the overall casting, the other with high-quality steel welding. It is mainly the material gathered in the body for hammerhead hit, to achieve the purpose of crushing. The rotor is assembled by the spindle, disc, hammer and so on. When the motor drives the rotor through the pulley, the hammer rotates at a high speed, resulting in strong striking force, and the material is crushed into the rotor hitting belt. When the crushed material reaches the required size, it falls into the silo. The size of the particle size by sieve grate to control. The size of the output is also proportional to the grate hole. Features: 1. The whole machine adopts sealed design, no dust pollution, easy to clean. 2. Unique crushing chamber and fan-shaped hammer structure, reducing the sample preparation process of water loss, crushing effect is good, uniform particle size. 3. With air filter, effectively prevent the dust in the crushing process of leakage. 4. The transmission agencies have protective measures, in line with safety requirements. 5. Hammer high manganese steel wear-resistant alloy materials, special use of frit material, durable. Technical Parameters: Reduction ratio: 1/8, Feed size: ≤ 50mm, Sample size: ≤ 1,3,6 mm adjustable, uniform particle size; Adapt to moisture: <12% Productivity: 300 ~ 600kg / h; Working power supply (V): three-phase, 380, Motor power (kW): 1.5;
Introduction: As long as the hammer crusher organism, rotor system, hammerhead, sieve grate, transmission, power part. Body with two structural forms, one for the overall casting, the other with high-quality steel welding. It is mainly the material gathered in the body for hammerhead hit, to achieve the purpose of crushing. The rotor is assembled by the spindle, disc, hammer and so on. When the motor drives the rotor through the pulley, the hammer rotates at a high speed, resulting in strong striking force, and the material is crushed into the rotor hitting belt. When the crushed material reaches the required size, it falls into the silo. The size of the particle size by sieve grate to control. The size of the output is also proportional to the grate hole.
