Introduction: The PC2000 Fiber Spectrometer, which offers optical resolution up to 0.1 nm, a focal length of 100 nm and a numerical aperture of 0.11, enables the spectrometer to achieve the best balance of resolution and sensitivity without increasing its own volume; EX dual blazed grating and double blazed grating with a more even response over a wide range of wavelengths, which solves the problem of wideband efficiency equalization and higher order interference with the widest coverage reaching 200-1100 nm. PC2000 fiber optic spectrometer can be equipped with a special UV-sensitized deep UV CCD, the spectral detection range can be extended to the deep UV band; the same time, PC2000 high resolution fiber spectrometer, with the flag and the underlying call technology, to ensure high-speed measurement, To further enhance the measurement accuracy; allows users of products in a leading position, giving the product a stronger bargaining power; with the provision of low-cost optical fiber, build personalized spectrometry equipment. Features: 1, high-resolution optical platform, without increasing the size of the spectrometer to achieve the best resolution and sensitivity of the balance; 2, full-spectrum technology, the use of linear gradient cancel high-order optical filters and variable blazed grating, to solve the problem of wide-band efficiency and high order interference, the widest coverage of 200-1100 nm; 3, ultra-high resolution, providing up to 0.1nm optical resolution; 4, high-speed control technology, can be set within 1ms new integration time, saving time for spectrometer control; 5, the flag bit technology, ready to check the spectrum spectrometer to complete the state, at any time to re-capture, do not need a long time to wait; 6, the underlying call technology to support system integration development, user-friendly to develop spectrometer applications more quickly. Technical Parameters: Size (mm): 115 * 158 * 46.5 Weight (g): 600 Detector: TCD1304DG linear CCD array Detector response range (nm): 300-1100 Effective Pixels: 3648 Pixel size (μm): 8 × 200 A / D resolution: 16 bit Light Response Inhomogeneity: 1% (max) Sensitivity (V / lx • s): 130 photons / count at 400 nm; 60 photons / count at 600 nm Optical system parameters Optical system: F / 4, f / 4, symmetrical cross-light path Focal length (mm): 100 mm Slit size (μm): 5, 10, 25, 50, 100, 200, etc., or no slit (custom) Gratings: Scribing or holographic gratings with the same blazing wavelength for a variety of different parameters (customizable) Cylindrical mirror s: optional Eliminate secondary spectral filters: Bandpass or longpass filters to eliminate secondary spectrum Optical fiber and its connection interface: NA 0.22, SMA905 Spectral wavelength test range: Dependent on grating selection, 200 ~ 1100nm Spectral Resolution (nm): ~ 0.035-8.4 nm FWHM (Determined by grating constant, slit width, detector type, etc.) SNR: 300: 01: 00 (full scale range) Wavelength tolerance: About ± 0.2 Integration time: 1 millisecond to 2 seconds Dynamic range: 300 Stray light: <0.05% at 600 nm; <0.10% at 435 nm Correction linearity:> 99.8%
PC2000 Industrial Fiber Optic Spectrometer is a lightweight and portable miniature spectrometer. PC2000 industrial optical fiber spectrometer is suitable for general spectral measurement applications in scientific research and industrial production. It has high measurement accuracy and comes with software. It is used in a variety of areas involving spectral measurement analysis with its high cost performance, such as: plasma measurement, LED analysis Picking, color measurement, chemical process analysis, etc .; and its unique design can be easily integrated into other systems.
