Introduction: The 800°C high-pressure furnace OTF-1200X-HVHP-80 is a high-temperature and high-pressure tube furnace. The furnace tube is made of SS310S nickel-base alloy steel. Both ends are equipped with flanges and valves. They are designed for use under 105 PSI high pressure and can be used in Special compounds are treated under an atmosphere of oxidizing or inert gas. Features: 1, double shell, with a circulating air cooling system, the shell surface temperature <55 °C. 2. An aluminum radiator is installed on both sides of the shell to make the flange temperature <100°C. 3. The surface of the inner furnace is coated with alumina imported from the United States, which can increase the heating efficiency and prolong its service life. 4, using PID controller, you can set 30 paragraphs of temperature and humidity procedures, with overheating and burnout protection. 5, the top of the flange is equipped with a pressure sensor, so that the pressure value in the tube is displayed in real time, and the LED digital display is more convenient for data reading. 6, the high pressure instrument is equipped with an alarm system module, can set a high pressure value and low pressure value, when the pressure within the tube exceeds the range, the warning light flashes, the alarm whistle, and automatically cut off. 7, has passed CE certification. Technical Parameters Power supply: AC 220V 50Hz/60Hz 2.5KW Furnace tube: SS310S seamless nickel base alloy steel, Ø80mm, ID Ø72mm, length 1000mm Heating element: molybdenum-doped chrome-aluminum alloy resistance wire Heating area: 440mm Constant temperature area: 200mm Pressure and temperature: 525PSI max at ≤ 650°C (36bar) 315PSI max at 700°C (21bar) 105PSI max at 800°C (7bar) Heating cannot exceed 800°C Maximum heating rate: ≤30°C/min Temperature control accuracy: ±1°C Vacuum degree: 10-2torr (mechanical pump), 10-5torr (molecular pump) Size: 550mm × 380mm × 520mm; Weight: 55kg Installation conditions: This equipment is required to be used at altitudes below 1000m, temperature 25°C±15°C, and humidity 55%Rh±10%Rh. 1. Water: The equipment is equipped with a self-circulating cooling water machine (filled with purified water or deionized water) 2, electricity: AC380V 50Hz (63A air switch), must have a good grounding 3. Gas: Argon gas (99.99% or more purity) must be filled in the chamber of the equipment. It is necessary to prepare an argon gas cylinder (with a Ø6mm double-jacketed fitting). 4、Workbench: Size 1500mm×600mm×700mm, load-bearing more than 200kg 5, ventilation device: need
Introduction: The 800°C high-pressure furnace OTF-1200X-HVHP-80 is a high-temperature and high-pressure tube furnace. The furnace tube is made of SS310S nickel-base alloy steel. Both ends are equipped with flanges and valves. They are designed for use under 105 PSI high pressure and can be used in Special compounds are treated under an atmosphere of oxidizing or inert gas.
