Introduction: Slidable OTP furnace OTF-1200X-4-RTP-SL is a rapid heat treatment furnace, using infrared lamp heating and rapid cooling of moving furnace, the highest heating rate is 100°C/s and the cooling rate is 5°C/s. Features: 1, double stainless steel structure, with two cooling fans. 2. The surface of the inner furnace is coated with imported high-temperature alumina coating, which can increase the heating efficiency of the equipment and extend the service life of the equipment. 3. There is a slide rail at the bottom, and the furnace body can be manually slid from one end to the other so as to achieve rapid temperature rise and cooling. 4, PID controller, can set 30 paragraphs of heating and cooling procedures, and with overheating protection. Technical Parameters Power Supply: Single Phase 208V-240V AC 50Hz/60Hz 9KW Quartz tube: outside diameter Ø100mm, length 1400mm Heating element: infrared tube Heating chamber: Ø100mm×1400mm Working temperature: maximum temperature 1000°C(<1h), continuous temperature 950°C Temperature control accuracy: ±0.5°C Maximum heating rate: 100°C/s Cooling rate: 8.3°C/s (900°C-600°C) 4.4°C/s (600°C-500°C) 2.8°C/s (500°C-400°C) 1.6°C/s (400°C-200°C) 0.9°C/s (300°C-200°C) Thermocouple: Type K, Ø6.35mm x 610mm Slide rails: Made of Cr-plated thick steel tubes, controlled automatically by a temperature controller. When the program is completed, the furnace slides at the set speed, the rail length is 1200mm, the sliding speed is 0-70mm/s, and the sliding distance is 340mm. Vacuum Flange: Stainless steel, long-term operation at >900°C must be water-cooled, cooling water flow 4L/min Flowmeter: 16ml/min-160ml/min Vacuum degree: 10-3torr (mechanical pump), 10-5torr (molecular pump) Size: furnace body 460mm × 330mm × 520mm, furnace body and slide 1800mm × 450mm × 680mm; Weight: 80kg Optional accessories: 1, anti-corrosion digital vacuum display meter 2, circulating water cooler Installation conditions: This equipment is required to be used at altitudes below 1000m, temperature 25°C±15°C, and humidity 55%Rh±10%Rh. 1. Water: The equipment is equipped with a self-circulating cooling water machine (filled with purified water or deionized water) 2, electricity: AC380V 50Hz (63A air switch), must have a good grounding 3. Gas: Argon gas (99.99% or more purity) must be filled in the chamber of the equipment. It is necessary to prepare an argon gas cylinder (with a Ø6mm double-jacketed fitting). 4、Workbench: Size 1500mm×600mm×700mm, load-bearing more than 200kg 5, ventilation device: need
Introduction: Slidable OTP furnace OTF-1200X-4-RTP-SL is a rapid heat treatment furnace, using infrared lamp heating and rapid cooling of moving furnace, the highest heating rate is 100°C/s and the cooling rate is 5°C/s. Features: 1, double stainless steel structure, with two cooling fans. 2. The surface of the inner furnace is coated with imported high-temperature alumina coating, which can increase the heating efficiency of the equipment and extend the service life of the equipment. 3. There is a slide rail at the bottom, and the furnace body can be manually slid from one end to the other so as to achieve rapid temperature rise and cooling. 4, PID controller, can set 30 paragraphs of heating and cooling procedures, and with overheating protection.
