Summary: Nubox-8016 intelligent blasting vibration measuring instrument is the latest generation of special testing and analysis instrument specially developed and produced for the engineering blasting monitoring industry on the basis of the vibration measuring equipment provided by topu for many years for the blasting industry. It has all the functional requirements required by blasting vibration measurement site, with a color LCD touch screen, whether it is highly intelligent, one-button operation, testing; The 16, 384 segments of super capacity, as well as the on-site direct connection printer, print test report, nubox-8016 intelligent blasting vibration meter can make you easily have these functions. Features and applications: Business/non-business blasting operation unit qualification application must be equipped with equipment Blasting construction environmental safety assessment must be equipped with equipment CMC manufacturing measuring instrument license (sichuan: 00000368) CPA instrument form approval certificate Meet the "blasting safety regulations" (gb6722-2014) and "blasting operation unit qualification conditions and management measures" (ga990-2012) Highly intelligent: no need to face cumbersome Settings, a key to complete the measurement work Super high precision: 0.0047cm/s ~ 35cm/s Real-time display: vibration signal can be observed in real time during measurement Mass storage: up to 16384 vibration data can be recorded * data management: in the face of massive data, can quickly record the time, maximum amplitude and other conditions to query data. The maximum vibration speed can be obtained without opening the data, and the original data waveform or automatic calculation results can be provided Support cloud, wireless applications Field application: with the field direct printer, U disk derivative and other functions Technical indicators: Communication interface :USB, wireless Channel number :2/3/4 channels/set Display screen :3.5 "color touch LCD screen, can operate the instrument independently Input mode: 7-core aviation connector, single-terminal bipolar voltage input One-key intelligent acquisition: trigger threshold adaptive, no need to set, one key to complete the whole measurement work, no need to face cumbersome Settings Data display mode: real-time display of measured data and measured waveform, and simultaneously record and monitor Data storage: it can record 16384 times of data at most, and the single record time can reach 11 seconds at most. No data will be lost between the two records Maximum sampling rate :200KSps/CH The frequency range of vibration signal can be collected :0.5 ~ 800Hz A/D resolution :16Bit Vibration measurement range :0.0047cm/s ~ 35cm/s Reading accuracy: less than or equal to 0.05% Signal to noise ratio: 86 db or higher Channel isolation: greater than or equal to 90dB Phase difference between channels: 0.3 ° or less (0 ~ 10 KHZ) Gain and zero: fully self-aligning
Summary: Nubox-8016 intelligent blasting vibration measuring instrument is the latest generation of special testing and analysis instrument specially developed and produced for the engineering blasting monitoring industry on the basis of the vibration measuring equipment provided by topu for many years for the blasting industry. It has all the functional requirements required by blasting vibration measurement site, with a color LCD touch screen, whether it is highly intelligent, one-button operation, testing; The 16, 384 segments of super capacity, as well as the on-site direct connection printer, print test report, nubox-8016 intelligent blasting vibration meter can make you easily have these functions.
