NSTS-500 Intelligent Bacteria Collector Introduction
The sterility inspection system is based on the principle of the membrane filtration method. Through directional pressure, liquid samples are added to the bacteria collection incubator and filtered under positive pressure. After filtration, the filter membrane is rinsed to remove the product's antibacterial agent, and then filled in the filter. Fill the culture medium to test whether the test product contains bacteria.
Application area:
1 Pharmaceutical industry: Purification water, water for injection, sterile preparations (large infusions, small injections, powder injections, biological products, blood products, ophthalmic preparations, maintenance solutions, etc.) for sterility inspection and microbial limit inspection
2 Medical equipment industry: sterility inspection and microbial limit inspection of purified water, water for injection, syringe, infusion set, blood transfusion set, venous catheter, etc .;
The preferred method for sterility inspection in the 2015 edition of the Chinese Veterinary Pharmacopoeia and Chinese Pharmacopoeia
3 Food and beverage industry;
4 Environmental protection industry, etc. Features
1.Sterility check operation management software has 2 operation modes: automatic operation and manual operation
2.Multiple preset programs can be set;
3.The peristaltic pump has a safety protection device to avoid human injury caused by operating errors;
4.The whole machine adopts 304 stainless steel integrated ultra-small design to reduce the space occupied by the operation table;
5.The speed control is controlled by the stepless speed regulation method, which is simple and straightforward to operate and has a pause memory function;
6.The foot switch adopts imported aviation waterproof terminal connection, ultra-low voltage control electrical appliances, there will be no leakage injury
Human danger
The surface of the cabinet is treated with mirror surface, which is convenient for disinfection and cleaning;
The drainage tank can be divided into two types: rotary type and connected type;
All the mounting ends of the fuselage are waterproofed to prevent liquid from penetrating into the machine. According to customer requirements, the inspection product recovery function can be added, and the recovery bracket can be freely disassembled to meet the special needs of expensive inspection product recovery and product sterilization Technical Parameters
Power supply: 220V \ 110V ± 10%, 50 / 60Hz
Number of revolutions: 0-240prm
Total suspension height: 37cm
Weight: 18kg
Case material: 304 stainless steel
Dimensions: Size cm (length x width x height): 48X30X11
Disinfection: autoclave resistant
Outer surface: alcohol-resistant
Introduction
The sterility inspection system is based on the principle of the membrane filtration method. Through directional pressure, liquid samples are added to the bacteria collection incubator and filtered under positive pressure. After filtration, the filter membrane is rinsed to remove the product's antibacterial agent, and then filled in the filter. Fill the culture medium to test whether the test product contains bacteria.
