NHG268 plastic film gloss meter Introduction: NHG268 plastic film gloss meter is a new gloss meter developed by our company. It has been upgraded from automatic shifting to automatic shifting. It is mainly designed to meet the needs of measuring high-gloss surfaces such as metal and electroplating. The measuring range can be The low gloss surface function is measured from 0 to 1000 Gs and at the same time from 0 to 99.9 Gs. One machine can be used to save users' repeated investment. MN60-D is designed and manufactured according to international standard ISO2813, foreign standard ASTMD523, DIN67530 and national standard GB9754, GB9966, GB/T13891, all technologies can be reached, and higher than JJG696 -2002 "Mirror Gloss Meter and Gloss Plate" The requirements for the first-level working machine in the identification procedure. Features: 1. It can measure low-gloss surface of 0～99.9Gs, and can measure high-gloss surface of metal, electroplating, etc. from 0 to 1000Gs. One machine can be used to save users' repeated investment. 2. Small size, light weight, and real portable machine. 3. Power saving, worry-free, high efficiency, one battery can continue to use nearly 60 hours to measure nearly 10,000 data. 4. High stability, ready to measure. 5. LED long life light source. 6. Quartz crystal standard version, the annual rate of change is extremely low. Technical Parameters: 1. Gloss parameters (gloss unit GS) 2. Projection angle: 60° 3. Working voltage: a 5th (AA) dry battery can be used. (1.5v) 4. Measurement area: 10×20mm 5. Window size: 14×28mm 6. Host size: 114 × 32 × 64mm (length × width × height) 7. Instrument net weight: 285g
Introduction: NHG268 plastic film gloss meter is a new gloss meter developed by our company. It has been upgraded from automatic shifting to automatic shifting. It is mainly designed to meet the needs of measuring high-gloss surfaces such as metal and electroplating. The measuring range can be The low gloss surface function is measured from 0 to 1000 Gs and at the same time from 0 to 99.9 Gs. One machine can be used to save users' repeated investment. MN60-D is designed and manufactured according to international standard ISO2813, foreign standard ASTMD523, DIN67530 and national standard GB9754, GB9966, GB/T13891, all technologies can be reached, and higher than JJG696 -2002 "Mirror Gloss Meter and Gloss Plate" The requirements for the first-level working machine in the identification procedure.
