Introduction: Torsion test bench for computer-controlled components is suitable for testing the torsional fatigue performance of all kinds of metal, non-metallic materials and various elastic components such as universal joints. It is mainly used for the testing of product performance of all enterprises and institutions, and at the same time it draws the characteristic curve of reverse and records the test data. The machine from the mechanical, electrical, computer, magnetic clutch water cooling system composed of four parts 1. Mechanical part of the structure and working principle: Workbench intermediate position for the workpiece torsion space, a fixed fixture (left), rotating fixture (right) of the two parts, for clamping sample. Torsion sensor mounted on the left side of the table. The right side of the table for the transmission part, the drive system uses Japan's all-digital AC servo motor and its drive through the cycloid reducer transmitted to the rotating fixture for rotation, to achieve the specimen torsion test. 2. Electrical and computer parts: The electrical part is composed of the drive system and the measurement control part. The computer realizes various control (automatic control and manual control), display (curve, torque, torsion angle, etc.) and data acquisition (setting test speed, torsion angle, etc. according to different needs ), Processing (automatically save the curve), the characteristic curve (torque - time curve, torque - angle curve) drawing and other functions; torque sensor to test the torque of the specimen, photoelectric encoder to achieve the measurement of specimen torsion angle. Technical Parameters: Maximum torque: ± 100Nm Torque effective measuring range: 0 ~ ± 100Nm Torque minimum reading value: 0.05Nm Test machine effective test space: 400mm Relative error of indication of test force: ≤ ± 1.0% Relative repeatability error of indication: ≤1.0% Return to zero error: ≤ ± 0.1% FS Loading frequency: 0 ~ 2Hz Supply voltage (three-phase four-wire system): 380VAC 50Hz power 1.5kW
Introduction: Torsion test bench for computer-controlled components is suitable for testing the torsional fatigue performance of all kinds of metal, non-metallic materials and various elastic components such as universal joints. It is mainly used for the testing of product performance of all enterprises and institutions, and at the same time it draws the characteristic curve of reverse and records the test data. The machine from the mechanical, electrical, computer, magnetic clutch water cooling system composed of four parts 1. Mechanical part of the structure and working principle: Workbench intermediate position for the workpiece torsion space, a fixed fixture (left), rotating fixture (right) of the two parts, for clamping sample. Torsion sensor mounted on the left side of the table. The right side of the table for the transmission part, the drive system uses Japan's all-digital AC servo motor and its drive through the cycloid reducer transmitted to the rotating fixture for rotation, to achieve the specimen torsion test. 2. Electrical and computer parts: The electrical part is composed of the drive system and the measurement control part. The computer realizes various control (automatic control and manual control), display (curve, torque, torsion angle, etc.) and data acquisition (setting test speed, torsion angle, etc. according to different needs ), Processing (automatically save the curve), the characteristic curve (torque - time curve, torque - angle curve) drawing and other functions; torque sensor to test the torque of the specimen, photoelectric encoder to achieve the measurement of specimen torsion angle.
