NBD-RT1200-50ITZ can open the swinging type rotary tube furnace Introduction: Rotating high temperature furnace can be used for positive and negative materials of lithium ion battery (iron aluminum phosphate, lithium manganate, lithium cobalt oxide, ternary, graphite negative electrode, etc.), rare earth materials, chemical catalytic materials, magnetic materials, powder metallurgy materials, non-ferrous materials And laboratory calcination and drying of powder or granular materials of kaolin non-metallic mineral materials, high temperature reaction, heat treatment, carbonization and the like. The user can also perform atmosphere protection according to the material firing process. The flexible and compact body design and high cost performance are favored by users. The smaller furnace not only makes the temperature control more accurate, but also has good stability. Features: The material is fired evenly, the material is dynamically turned in the furnace, and the heat is evenly distributed to achieve sufficient reaction of the material; The heating efficiency is high, and the material movement increases the heating surface; Complete automation control improves the operability of the system; Excellent dynamic sealing system The product adopts fully automatic control mode, touch screen and digital display. Vacuum system, power system, gas flow, heating system, motion system, process, system monitoring and data acquisition, etc. Technical Parameters: Model: NBD-RT1200-50ITZ Maximum temperature: 1200 °C Dimensions mm mm * height * depth: 740 * 1180 * 520 Pipe diameter (outer) mm: Φ25/50 Tilt angle: 20° Heating zone length mm: 200 Constant temperature zone ± 1 ° C length mm: 120 Rotation rate (rpm): adjustable speed Weight Kg (approx): 68
Introduction: Rotating high temperature furnace can be used for positive and negative materials of lithium ion battery (iron aluminum phosphate, lithium manganate, lithium cobalt oxide, ternary, graphite negative electrode, etc.), rare earth materials, chemical catalytic materials, magnetic materials, powder metallurgy materials, non-ferrous materials And laboratory calcination and drying of powder or granular materials of kaolin non-metallic mineral materials, high temperature reaction, heat treatment, carbonization and the like. The user can also perform atmosphere protection according to the material firing process. The flexible and compact body design and high cost performance are favored by users. The smaller furnace not only makes the temperature control more accurate, but also has good stability.
