- Model NumberN10
- Brand NameSHZFSYSSB
- Payment TermsT/T, paypal
Instrument description:
Bacterial endotoxin test of constant temperature is in accordance with the "Chinese pharmacopoeia" 2010 version of the bacterial endotoxin test requirements: reaction tube should be "vertical in 37 + / - 1 ℃ suitable thermostat, thermal insulation 60 + 2 minutes".
N10 test tube thermostat is a special test equipment for bacterial endotoxin test by gel method.
Technical parameters:
1. The range of temperature control: room temperature + 5 ~ 100 ℃
2. The heating time: 20 minutes or less (from 20 ℃ to 100 ℃)
3. The temperature control precision: plus or minus 0.5 ℃ or less
4. Display precision: 0.1 ℃
5. The module temperature uniformity: plus or minus 0.5 ℃ or less
6. Maximum power: 200W
7. The highest temperature: 100 ℃
8. Time setting: up to 99h and 59min
Main features:
1. Real-time temperature display and time decreasing display
2. Automatic fault detection and alarm function
3. Alarm and prompt function of buzzer
4. Temperature deviation calibration function
5. Convenient module replacement facilitates cleaning and disinfection
6. Built-in over-temperature protection device
7. It has the function of interrupt and pause
8. Liquid crystal display, thin film switch
Product advantages:
1, the instrument adopts the most advanced heating technology and pulse temperature control technology, temperature control accuracy is 37 + / - 0.15 ℃, the temperature difference between tube hole acuities were 0.3 ℃. Traditional use of constant temperature water bath temperature control precision is only + / - 1 ℃, and the uneven distribution of temperature, high temperature near the position of heat pipes, deviated the heating tube of water temperature is low, easy to cause the difference of limulus reagent reaction.
2, the instrument is equipped with timing device, the user can adjust the timing time in 0~99h59min; And has the independent beeping prompt sound. The instrument can be used simultaneously with 50 test tube holes.
3. The instrument is equipped with a dust cover, and the test tube is free of sealing during use, making the operation of the experiment more convenient and quick. If the traditional constant temperature water bath box is used, the test tube must be sealed, otherwise water vapor or small drops of water will enter the test tube and cause pollution, and each test tube will be sealed one by one, which is troublesome and time-consuming and affects the accuracy of the experiment.
4. The constant temperature of the instrument has been adjusted before leaving the factory. The user does not need to adjust the temperature of the instrument. Before each use, only 15~20 minutes in advance to open the instrument preheating, instrument temperature on the instrument temperature display display.
5. Each instrument has 50 test tube holes. The instrument can be customized according to the user needs 2ml ampoules for reaction test tube and 10 75mm standard reaction test tube. The instrument is beautiful in appearance, compact in size and convenient to use.
