- Model NumberN10-01
- Brand NameHZASYQ
- Payment TermsT/T, paypal
Brief introduction:
"Chinese pharmacopoeia" 2002 version of the bacterial endotoxin test requirements: reaction tube should be "vertical in 37 + / - 1 ℃ suitable thermostat, thermal insulation 60 + 2 minutes". According to this requirement, the company developed a special test equipment for bacterial endotoxin test by gel method -- n10-01 test tube thermostat. Compared with the conventional thermostatic water bath.
Product features:
Real-time temperature display, time decreasing display
Automatic fault detection and alarm function
Buzzer alarm prompt function
Temperature deviation calibration function
Convenient module replacement for cleaning and disinfection
Built-in over-temperature protection device
Have interrupt pause function
LCD, thin film switch
Performance index:
1. The range of temperature control: room temperature + 5 ~ 100 ℃
2. Time setting: up to 99h59min
3. The time setting accuracy: plus or minus 0.5 ℃ or less
4. Display precision: plus or minus 0.1 ℃
5. Heating up time (25 ℃ to 100 ℃) : 20 min or less
6. The module temperature uniformity: plus or minus 0.5 ℃ or less
Product advantages:
1. USES DIP temperature control technology, temperature control accuracy is 37 + / - 0.15 ℃, the temperature difference between tube hole acuities were 0.3 ℃.
Traditional use of constant temperature water bath temperature control precision is only + / - 1 ℃, and the uneven distribution of temperature, high temperature near the position of heat pipes, deviated the heating tube of water temperature is low, easy to cause the difference of limulus reagent reaction.
2. The instrument is equipped with timing device, and the user can adjust the timing time in 0~99h59min at will;
And has the independent beeping prompt sound.
The instrument can be used simultaneously with 70 test tube holes.
3. The instrument is equipped with a dust cover, and the test tube is free of sealing during use, making the operation of the experiment more convenient and quick.
If the traditional constant temperature water bath box is used, the test tube must be sealed, otherwise water vapor or small drops of water will enter the test tube and cause pollution, and each test tube will be sealed one by one, which is troublesome and time-consuming and affects the accuracy of the experiment.
4. The constant temperature of the instrument has been adjusted before leaving the factory. The user does not need to adjust the temperature of the instrument.
Before each use, only 15~20 minutes in advance to open the instrument preheating, instrument temperature on the instrument temperature display display.
Each instrument has 70 test tube holes.
The instrument can be customized according to the user needs 2ml ampoules for reaction test tube and 10 75mm standard reaction test tube.
The instrument is beautiful in appearance, compact in size and convenient to use.
