Introduction: It is mainly used to study the test and evaluation of the tribological properties of materials or surface coatings. The tester simulates rotating and linear reciprocating motion under a certain test force, and tests by controlling and changing test force, speed, frequency, stroke, time, friction mating material, surface roughness, hardness, and other parameters. To assess the combined performance of materials or surface coatings. The friction force, test force and temperature condition of the friction pair can be dynamically detected, and the curve of each parameter can be plotted in real time. The main parameters can be over-preset or alarm protection. Technical Parameters: Test force range: 1-200N; Speed range: 1-2000 rpm Frequency range: 1-60Hz Reciprocating friction measurement range: 1-50N Rotary torque: 0-2.5Nm Reciprocating displacement range: ±5mm Reciprocating frictional forms: Ball-Plate, Pin-Plate and Post-Watt Rotary friction forms: ball-disc, pin-disc and end face Temperature: Room temperature -600°C
Introduction: It is mainly used to study the test and evaluation of the tribological properties of materials or surface coatings. The tester simulates rotating and linear reciprocating motion under a certain test force, and tests by controlling and changing test force, speed, frequency, stroke, time, friction mating material, surface roughness, hardness, and other parameters. To assess the combined performance of materials or surface coatings. The friction force, test force and temperature condition of the friction pair can be dynamically detected, and the curve of each parameter can be plotted in real time. The main parameters can be over-preset or alarm protection.
