Brief introduction: Based on the principle of membrane filtration, the MT-606D microorganism limit detector and open filter constitute a complete microbial filtration system. The purpose of microbial retention is achieved by negative pressure drainage. Mainly used in all kinds of water, medicine, food and other media microorganism detection and laboratory sterilization, departiculates and so on. The operation process is not easily polluted, easy to clean and so on. The instrument can be equipped with F250 filter, 47mm diameter filter membrane can be used, the filter head can be disassembled independently, it is convenient to sterilize the key parts of the filter, and the filter can be quickly sterilized by flame in the experiment to ensure the accuracy of the experiment. Main features: The utility model has the advantages of simple operation and convenient operation. Filter head can be quickly disassembled, easy to operate. Applicable consumables: F250 filter cup (Φ 47mm microporous membrane); Filter head configuration selection: three, six; Filter head can quickly sterilize flame, convenient for continuous experimental operation. Technical parameters: 1. Suitable for consumption: F250 filter cup (Φ 47mm microporous membrane) 2. Volume of incubator or filter cup: 250ml 3. Power source: ac 220V/50Hz 4. Power: 50W 5. Flow: ≥ 1300ml / min (pump flow) 6. Noise: ≤ 60dBX An (load) 7. Weight 8 kg (with PF50 pump head) 8. Shape size (length * width * height: 45 × 18 ~ (13) cm).
Brief introduction: Based on the principle of membrane filtration, the MT-606D microorganism limit detector and open filter constitute a complete microbial filtration system. The purpose of microbial retention is achieved by negative pressure drainage. Mainly used in all kinds of water, medicine, food and other media microorganism detection and laboratory sterilization, departiculates and so on. The operation process is not easily polluted, easy to clean and so on. The instrument can be equipped with F250 filter, 47mm diameter filter membrane can be used, the filter head can be disassembled independently, it is convenient to sterilize the key parts of the filter, and the filter can be quickly sterilized by flame in the experiment to ensure the accuracy of the experiment.
