Brief introduction: MT-4000A curing instrument used for temperature control computer control of imported computer temperature control instrument, timely data processing and statistical analysis, storage, contrast, humanized design, simple operation, accurate data, provide the most accurate data for the optimization of the rubber formula. Sulfur instrument and computer mouse buttons and buttons on the panel main point with the same function, in order to facilitate the user operation, the computer software interface is quite good, it is very convenient to use, the user can precisely measure the scorch time and curing time, curing rate index, maximum and minimum torque, is the quality of the rubber industry rapid inspection and control of rubber, rubber extrusion the ideal equipment for the study. MT-4000A type rotor vulkameter is a new generation of mechatronic products. The factory launched mainly by the host, OMRON high precision temperature control module, sensor, computer, lower computer data acquisition, printers and electrical chain components, temperature control, good repeatability. Executive standard: ISO6502:1991 GB/T3709-2003 ASTMD528995 Provide the vulcanization curve, curing speed curve and temperature curve. Multi curve continuous testing and arbitrary curve comparison test in the same interface, data stored in the database, real-time or historical data curve. The report can print all export EXCEL format. Characteristic： 1, the instrument adopts the closed cavity real, and the United States Alfa (former Monsanto). The repeatability and the test data and the Aerfakebi. In the international leading position in the industry. 2, this instrument is based on a large database development platform, and the temperature control device is controlled by software and collected directly. This technology leads the new international trend 3, this instrument has the functions of statistics, analysis, storage and comparison. It is user-friendly and convenient to operate Technical parameter: Cavity structure: fully closed type without rotor: room temperature -200 DEG C Temperature range: 0 - 200 DEG C Temperature measurement accuracy: less than 0.1 DEG C Temperature resolution: 0.01 DEG C Torque range: (020N.m automatic) Torque resolution: 0.001N.m Mode frequency: 1.7Hz Amplitude: + 0.5o + 1o Power supply: AC 220V + 10%50Hz The compressed air is not less than 0.40Mpa Ambient temperature: 035 temperature relative humidity <80% The curing time setting range: 2300min, T90 in 10 seconds to 5 hours. Print content: date, time, temperature, vulcanization curve, temperature curve, ML, MH, TS1, TS2, T10, T30, T50, T60, T90, Vc1, Vc2 and so on
Brief introduction: MT-4000A curing instrument used for temperature control computer control of imported computer temperature control instrument, timely data processing and statistical analysis, storage, contrast, humanized design, simple operation, accurate data, provide the most accurate data for the optimization of the rubber formula. Sulfur instrument and computer mouse buttons and buttons on the panel main point with the same function, in order to facilitate the user operation, the computer software interface is quite good, it is very convenient to use, the user can precisely measure the scorch time and curing time, curing rate index, maximum and minimum torque, is the quality of the rubber industry rapid inspection and control of rubber, rubber extrusion the ideal equipment for the study. MT-4000A type rotor vulkameter is a new generation of mechatronic products. The factory launched mainly by the host, OMRON high precision temperature control module, sensor, computer, lower computer data acquisition, printers and electrical chain components, temperature control, good repeatability. Executive standard: ISO6502:1991 GB/T3709-2003 ASTMD528995 Provide the vulcanization curve, curing speed curve and temperature curve. Multi curve continuous testing and arbitrary curve comparison test in the same interface, data stored in the database, real-time or historical data curve. The report can print all export EXCEL format.
