Brief introduction: MT-302D microbiological limit tester is based on the principle of membrane filtration, which consists of a complete microorganism filtration system with open filter. The purpose of microbial interception is achieved by negative pressure pumping. It is mainly used for microbial detection in various kinds of water, medicine, food and other media. The process is not easy to be contaminated, easy to clean and so on. It can be matched with F250ml filter, and 47mm diameter filter membrane can be used. The filter can be detachable independently. It is convenient to sterilize the sterilization of the key parts. In the experiment, the filter can also be quickly sterilized by the flame to ensure the accuracy of the experiment. Main features: No pump bottle, direct drainage, simple operation, convenient; The filter head can be quickly disassembled, and the operation is simple and fast. Applicable consumables: F250 filter (47mm microporous filter) Filter head configuration selection: three heads, six heads The filter head can quickly sterilize the flame and facilitate continuous experimental operation. Technical parameters: 1. Applicable consumables: F250 filter (47mm microporous filter) 2. Culture or filter cup volume: 250ml 3. Power: AC 220V/50Hz 4. Power: 50W 5. Flow: more than 1300ml/min (pump flow) 6. Noise: less than 60dB (A) (load) 7. Weight: 8kg 8. Shape size (long * width * high):40.5 x 23 x 12cm
Brief introduction: MT-302D microbiological limit tester is based on the principle of membrane filtration, which consists of a complete microorganism filtration system with open filter. The purpose of microbial interception is achieved by negative pressure pumping. It is mainly used for microbial detection in various kinds of water, medicine, food and other media. The process is not easy to be contaminated, easy to clean and so on. It can be matched with F250ml filter, and 47mm diameter filter membrane can be used. The filter can be detachable independently. It is convenient to sterilize the sterilization of the key parts. In the experiment, the filter can also be quickly sterilized by the flame to ensure the accuracy of the experiment.