MPS-1000 Membrane Aperture Analyzer Introduction:
The MPS-1000 Membrane Aperture Analyzer is a gas-liquid pore size measuring instrument that uses a gas to squeeze a liquid to measure the discharge pressure of different surface tension immersion liquids and the flow curve of the passing gas, thereby obtaining the material. Large pore size, average flow pore size, smaller pore size, pore size distribution, gas permeability and other data. Impregnation solutions with different surface tensions are suitable for sample testing in different pore size ranges. There are also different influent solutions for the material of the sample to be tested. The MPS-1000 is equipped with four immersion fluids to meet the testing needs of different samples. Features:
1. Fully automatic measurement
2. Can measure the through pore size and distribution of the sample
3. Measured sample gas permeation rate
4. Test time is about 50min
5. Data can be exported by EXCEL, TXT
6. Use special infusion solution
(Other infusions can also be used)
7. Can replace multiple specifications sample warehouse Technical Parameters:
1. Test range: bubble point (larger aperture), average flow pore size, smaller pore size, pore size distribution, gas permeability, dry/wet gas flow
2. Large aperture range: 500um
3. Smaller aperture range / test pressure: 0.013um / 500psi
4. Test sample holder: various sizes of 10mm-60mm diameter
5. Sample thickness: larger thickness <3mm
6. Sample shape: sheet
7. Pressurized gas: dry air or high purity nitrogen
8. Test standard: ASTM / F316-03 GB/T32361-2015
9. Applications: filter, fiber, paper, fabric, non-woven fabric, film, battery separator, PTFE membrane, etc.
Introduction:
The MPS-1000 Membrane Aperture Analyzer is a gas-liquid pore size measuring instrument that uses a gas to squeeze a liquid to measure the discharge pressure of different surface tension immersion liquids and the flow curve of the passing gas, thereby obtaining the material. Large pore size, average flow pore size, smaller pore size, pore size distribution, gas permeability and other data. Impregnation solutions with different surface tensions are suitable for sample testing in different pore size ranges. There are also different influent solutions for the material of the sample to be tested. The MPS-1000 is equipped with four immersion fluids to meet the testing needs of different samples.
