| Technical highlight | |
| Technical highlight | The profile roughness is integrated to realize the primary measurement, and the profile and roughness are analyzed simultaneously The roughness measurement sensor is imported grating sensor, which has a large measuring range The first measurement can analyze the roughness of different areas of the workpiece. Improve measurement efficiency |
| Measurement items | |
| Harshness | Ra，Rq，Rz（Ry），Rz（DIN），R3z，Rz（jis），Rp，Rv，Rt，Rsk，Rsm，Rc ，Rpm，Rku，Rdq，Roc，Mr1，Mr2，Rpk，Rvk，Rk，Rdc，A1，A2，R，Rx，AR，Rcp，Rmax，Rz-ISO |
| Contourgraph | The parameters of prime line and section outline of various precision mechanical parts can be measured, angle processing (coordinate angle, angle with Y coordinate, angle of two straight lines), circle processing (distance from straight line to tangent line, distance from center to center, radius of arc), Distance from intersection to center, distance from center to line), point line processing (distance from intersection to line, distance from intersection to center, distance between two straight lines, intersection and intersection), groove depth, slot width, horizontal, vertical distance, inclination, Contour and other shape parameters. |
| Measuring range | |
| X-axis (horizontal guide rail) | 100mm |
| Z1 axis (sensor) | 25mm |
| Z axis (upright) | 400mm |
| Certainty of measurement | |
| Indicating error | ±5% |
| Stability of display | ±7% |
| Measurement reproducibility | ±3% |
| X axis indication accuracy (LX axis guide rail moving distance) | ±(0.8+0.002L)μm |
| Z1 axis indication accuracy (H=Z1 axis height measurement) | ±(0.5+0.005H)μm |
| X-axis horizontal arm | |
| Straightness | 0.6um/100mm |
| Type | Grating ruler |
| Grating resolution | 0.02μm |
| Raster origin | enter port |
| Z1 axis sensor | |
| Sensor type | grating sensor |
| resolution ratio | 0.02μm |
| place of production | enter port |
| Assessed length | λc×3、4、5、6、7 |
| Needle testing (integrated) | Diamond needle tip R: 5 μ m 60 degrees |
| Roughness Velocity | |
| Measuring speed | 0.1mm/s、0.32mm/s、0.5mm/s |
| Contourgraph Velocity | |
| Measurement speed | 0.1mm/s,0.2mm/s,0.5mm/s（Custom） |
| Positioning speed | 0.1mm/s,0.2mm/s,0.5mm/s（Custom） |
| Graphic magnification / reduction | |
| Graphic amplification | Scalable, magnified |
| Integrated adjustment table | |
| Integrated adjustment table | X axis horizontal tilt adjustment range: ±30 ° Y-axis adjustment range: ±7.5mm Z axis rotary adjustable 360 degrees (with fine tuning device) |
| Installation requirements | |
| Electric source | 220-240V AC, 50HZ, single ground wire; maximum power consumption 450W |
| compressed air | Pure compressed air: 0.4MPp, consumed 0.1m3 / min (0.25m3 / min supplied by gas source) |
| Environmental requirements | Working temperature: 10 °-30 °(normal temperature); humidity 20-80%RH (no dew), good ground line, no obvious vibration source |
Please inquire
Please inquire
