Introduction: MM-2000 microcomputer controlled friction and wear tester can be used for various wear resistance of various metal materials and non-metal materials (nylon, plastics, etc.) under various conditions such as sliding friction, rolling friction, rolling-sliding compound friction and intermittent contact friction. Tests used to evaluate the friction mechanism of materials and determine the coefficient of friction of materials. And can simulate various materials in dry friction, wet friction, abrasive wear under different conditions such as friction wear test. MM-2000 microcomputer controlled friction and wear tester adopts computer control system, which can display real-time parameters such as test force, friction torque, friction coefficient and test time, and can record the friction coefficient-time curve during the experiment. Rolling friction test can be adjusted to achieve different slip rates; the results of the product meet the GB/T12444.2-90 metal wear test method - MM wear test; GB/T3960-83 plastic sliding friction test method. Due to its many functions, simple and reliable structure, and easy to use, there are several standard test methods based on this model, and it is widely used abroad. Therefore, it has also been widely used in the research field of domestic tribology. Technical Parameters: Product model number: MM-2000N Maximum test force: 2000N Test force measurement range: 0N~2000N Relative error of test force indication: Not more than ±2% over 10% of full scale Automatically maintain indication error when testing force is long: ±10% of full scale, no more than ±2% Friction measuring range: 0～15 N•m Spindle speed error: ±5(r/min) The sample shaft speed: 360; 180 rev / min The following sample shaft speed: 400; 200 rev / min The maximum axial movement distance of the sample: ±4mm Test time display and control range: 1s~9999s(min) Temperature Control Range: Room Temperature -60°C Spindle speed control range: 1~99999999 Test machine dimensions: 970×660×1100mm Tester quality: about 500kg Time-Frictional Torque Curve: The computer can display the measurement and data processing of each parameter and can display the time-friction torque curve. Record, print, and generate report of test results
Introduction: MM-2000 microcomputer controlled friction and wear tester can be used for various wear resistance of various metal materials and non-metal materials (nylon, plastics, etc.) under various conditions such as sliding friction, rolling friction, rolling-sliding compound friction and intermittent contact friction. Tests used to evaluate the friction mechanism of materials and determine the coefficient of friction of materials. And can simulate various materials in dry friction, wet friction, abrasive wear under different conditions such as friction wear test. MM-2000 microcomputer controlled friction and wear tester adopts computer control system, which can display real-time parameters such as test force, friction torque, friction coefficient and test time, and can record the friction coefficient-time curve during the experiment. Rolling friction test can be adjusted to achieve different slip rates; the results of the product meet the GB/T12444.2-90 metal wear test method - MM wear test; GB/T3960-83 plastic sliding friction test method. Due to its many functions, simple and reliable structure, and easy to use, there are several standard test methods based on this model, and it is widely used abroad. Therefore, it has also been widely used in the research field of domestic tribology.
