Introduction: The multifunctional capillary rheometer is specially designed for the production of filamentous samples of rubber and plastic raw materials. The instrument uses melting, extrusion and drawing to make powder or granular raw materials into filamentous samples with a minimum diameter of 10μm. For use in related experiments. RLS-400 melt drawing instrument is mainly composed of melting unit, extrusion unit, drawing unit and control system. The melting unit and the extrusion unit jointly undertake the task of raw material melting and extrusion. The melting unit is mainly composed of a barrel, heating components, temperature control unit and heat preservation components, and is mainly responsible for the melting of raw materials; the extrusion unit is mainly composed of a drive motor, a deceleration system, The ball screw, extrusion piston, die and other related components are mainly responsible for the extrusion task of the melted raw materials, which is equivalent to the rough processing of the wire drawing work; the wire drawing unit is mainly composed of winding wheels, guide wheels, and pinch wheels, which are active It is composed of wheels, reduction system and drive motor, which mainly completes the work of drawing and winding; the control system includes speed sensor, motion controller, man-machine dialogue and motor driver and other components, mainly to realize the extrusion speed and drawing (winding speed) Set, and synchronously control extrusion and drawing (winding) according to the setting, and finally produce the finished product. Features: 1. Set the melting temperature according to the requirements of the raw materials, and the melting unit can melt the raw materials in the barrel. 2. According to the requirements of raw material characteristics and drawing diameter, the extrusion unit extrudes the melted raw material in the barrel from the die at a set speed. 3. According to the requirements of raw material characteristics and wire drawing diameter, the wire drawing unit stretches the molten raw material extruded from the die to the designed diameter according to the set speed, and at the same time, it is wound. technical parameter: 1. Temperature range: room temperature~400℃ 2. Die: Ø0.5mm, Ø0.3mm 3. Discharge speed: 0~0.2mm/s 4. Winding speed: 0~20000mm/s 5. Winding diameter: Ø60mm 6. Maximum pressure: 500N 7. Minimum drawing diameter: 10 μm 8. Dimensions 500mm *300mm *800mm
Introduction: The multifunctional capillary rheometer is specially designed for the production of filamentous samples of rubber and plastic raw materials. The instrument uses melting, extrusion and drawing to make powder or granular raw materials into filamentous samples with a minimum diameter of 10μm. For use in related experiments. RLS-400 melt drawing instrument is mainly composed of melting unit, extrusion unit, drawing unit and control system. The melting unit and the extrusion unit jointly undertake the task of raw material melting and extrusion. The melting unit is mainly composed of a barrel, heating components, temperature control unit and heat preservation components, and is mainly responsible for the melting of raw materials; the extrusion unit is mainly composed of a drive motor, a deceleration system, The ball screw, extrusion piston, die and other related components are mainly responsible for the extrusion task of the melted raw materials, which is equivalent to the rough processing of the wire drawing work; the wire drawing unit is mainly composed of winding wheels, guide wheels, and pinch wheels, which are active It is composed of wheels, reduction system and drive motor, which mainly completes the work of drawing and winding; the control system includes speed sensor, motion controller, man-machine dialogue and motor driver and other components, mainly to realize the extrusion speed and drawing (winding speed) Set, and synchronously control extrusion and drawing (winding) according to the setting, and finally produce the finished product.
