Brief introduction The machine can determine the flow and cure rate of polymer materials, polymer materials can draw the stress-strain curve , plastics curve , measured softening point, the melting point , the temperature of the flow of points. Determination of the viscosity of the melt polymer material and activation of viscous flow , but also study the melt spinning process conditions . Features: 1 , the softening point of the polymer can be determined , the melting point , pour point , viscosity of the activation energy of viscous flow , the curing temperature of the thermosetting material and other performance indicators , the data on the rheological properties of polymer research has an important role . 2 , the instrument load loading device designed, using computer control, load continuous loading , high control accuracy. 3 , composition and temperature control system is novel, measuring the change in favor of the material at different temperatures . Existing rheometer need to draw flow curve approximation by hand , data processing complex. The instrument is plotted using a computer , the data derived equation agen-poiseuille, Rabinowitsch, melt flow rute , etc. are very accurate. Technical parameters: 1, temperature range : room temperature ~ 400 ℃ ± 1 ℃ 2, the heating rate : 1-10 ℃ / min, continuously adjustable , and rapid heating 3 , temperature measurement accuracy: computer displays <± 0.5 ℃, Resolution : 0.1 ℃ 4 , plugs area : 1cm2 5 , pressure range : 1-50MPa ± 1% 6 , the discharge port Specifications : Ø 1 × 5, Ø 1 × 10, Ø1 × 20, Ø1 × 40 (mm × mm) 7 , a gate material : tungsten carbide 8 , the sensor rated load value : 5KN 9. Load measurement accuracy : ± 1% 10. Load Resolution: 100,000 yards 11. The computer speed setting : 0.001-500mm / min 12. displacement measurement accuracy : ± 0.5% 13. Deformation measurement accuracy : ± 1% 14. Dimensions : 630 × 400 × 1900mm
Brief introduction The machine can determine the flow and cure rate of polymer materials, polymer materials can draw the stress-strain curve , plastics curve , measured softening point, the melting point , the temperature of the flow of points. Determination of the viscosity of the melt polymer material and activation of viscous flow , but also study the melt spinning process conditions