Introduction: MLSS-99 online sludge concentration meter application areas: 1. Sewage treatment plant-water inlet, outlet, aeration tank, return sludge, primary sedimentation tank, secondary sedimentation tank, thickening tank, sludge dewatering, etc. 2. Water plant -Filter backwash water, raw water and sedimentation tank effluent. 3. Others—Industrial production process/circulating cooling water and other water quality testing. Features: 1. Using optical band-pass filtering and modulated excitation light, effectively avoiding the influence of ambient light and water color on the measurement data; 2. Built-in light source compensation measurement circuit, which can effectively compensate the intensity attenuation of the light source; 3. The sensor comes with a wiper cleaning function, which effectively prevents the light window from staining; 4. Scratch-resistant toughened glass is used to effectively reduce light path changes caused by scratches on the light window; 5. Automatic conversion of measurement methods to adapt to a large range; 6. The sensor is equipped with self-diagnosis function to ensure the accuracy of the data; 7.240*160 graphic dot matrix liquid crystal, with LED backlight, can be operated under direct sunlight; 8. Optional modbus RTU protocol RS485 communication interface and 4-20mA analog signal output; 9. Optional 2 alarm signal output; Technical Parameters: Type B sensor 1. Range: 0-10g/L 2. Accuracy: <10% (depending on the homogeneity of sludge) or 10mg/l, whichever is greater 3. Repeatability: <3% 4. Flow velocity: maximum 2.5m/s (bubbles will affect the measurement) 5. Cleaning system: bottom scraper cleaning 6. Signal output: MODBUS RS485 communication protocol 7. Working temperature: 0℃ -45℃ 8. Working pressure: ≤ 0.2Mpa 9. Working voltage: 24VDC±10% 10. Protection level: IP68 11. Sensor material: Body: SUS316L+PVC (normal version) 12. Size: 49mm in diameter, 220mm in length 13. Weight: 0.8KG 14. Cable length: standard 10 meters (customizable) L-shaped stainless steel housing sensor 1. Range: 0-50g/L 2. Accuracy: <5% 3. Repeatability: <3% 4. Flow velocity: maximum 2.5m/s (bubbles will affect the measurement) 5. Cleaning system: cleaning at the bottom with scraping brush, cleaning every 10 minutes 6. Signal output: analog 4-20mA, load 300Ω 7. Working temperature: 0℃-40℃ 8. Working pressure: maximum 0.5 bar 9. Working voltage: 24VDC±10% 10. Protection level: IP68 11. Material of sensor housing: 316L 12. Size: diameter 48mm, length 133mm 13. Weight: 1.0KG 14. Cable length: standard 10 meters Transmitter 1. Analog output: optional 1 4-20mA current output, loop load 500Ω 2. Digital communication: RS485 standard MODBUS communication protocol 3. Relay output: optional two-way output relay, 250V AC/10A 4. Display screen: 240*160 graphic dot matrix LCD with LED back Can be operated under direct sunlight 5. Ambient temperature: -10-55°C, humidity: 5%-90% (no condensation) 6. Protection grade: polycarbonate shell, IP65 7. Power supply: 220VAC, 50 Hz; 24VDC±10% (optional) 8. Installation method: wall-mounted 9. Transmitter dimensions: 234/185/118mm, L/W/H 10. Weight: 1.5 kg (standard)
Introduction: MLSS-99 online sludge concentration meter application areas: 1. Sewage treatment plant-water inlet, outlet, aeration tank, return sludge, primary sedimentation tank, secondary sedimentation tank, thickening tank, sludge dewatering, etc. 2. Water plant -Filter backwash water, raw water and sedimentation tank effluent. 3. Others—Industrial production process/circulating cooling water and other water quality testing.
