Introduction: The Array Rotary Evaporator is an innovative pre-processing equipment that can simultaneously concentrate and process multiple samples. It is composed of multiple miniRotar rotary evaporator units, a vacuum system, and a solvent condensation recovery system, which can greatly improve the experiment while realizing multiple sample processing. Room space utilization. The array rotary evaporator can be equipped with six mini rotary evaporator units, which can be used at the same time, but also supports independent operation. It can independently perform temperature setting, speed adjustment, and vacuum release, without interfering with the normal operation of other rotary evaporator units. . Features: 1. The volume is one-third of the traditional rotary steaming The mini rotary evaporator innovatively adopts the longitudinal design of the rotating shaft, which reduces the width of the product to 25cm, which is only one third of the width of the traditional rotary evaporator. The 1.8-meter standard fume hood can hold 5 mini rotary evaporators, fully saving Fume hood space resources. 2. Working efficiency is three times that of traditional rotary steaming The array rotary evaporator is very suitable for the simultaneous processing of multiple samples. It can realize that one experimenter can control 6 mini rotary evaporators at the same time, and the working efficiency is three times that of ordinary rotary evaporators. 3. Independent release of vacuum without interfering with each other Each mini rotary evaporator has an independent quick release vacuum button, which can release the vacuum independently and end the evaporation of the sample without affecting the normal operation of other mini rotary evaporators connected in parallel. 4. Rich functions and easy to use The array rotary evaporator supports intelligent functions such as rapid vacuum lock, timed evaporation, and alternating forward and reverse rotation, which brings great convenience to the experimental work. Because the array rotary evaporator is equipped with a solvent recovery device, it not only guarantees the safety of operation, but also reduces the daily maintenance. Technical Parameters: Heating temperature range: room temperature~95℃ Temperature control accuracy: ±1℃ Temperature setting and display: fast setting with knob, digital display of target temperature and real-time temperature Dry-burning protection mode: Dry-burning automatic power off Heating method: hidden heating Rotation axis direction: vertical setting Rotation parameter setting and display: TFT4.3 inch touch LCD screen Rotating screen lifting mode: manual, automatic dual mode Maximum volume of rotating bottle: 500mL Rotating bottle interface specification: standard 24/29 interface Rotation mode: clockwise rotation Vacuum release method: manual switch valve to release vacuum Sample observation light: USB interface led light Air extraction interface: φ10mm pagoda connector Power supply voltage: AC220V 50/60Hz Input power: 700W
Introduction: The Array Rotary Evaporator is an innovative pre-processing equipment that can simultaneously concentrate and process multiple samples. It is composed of multiple miniRotar rotary evaporator units, a vacuum system, and a solvent condensation recovery system, which can greatly improve the experiment while realizing multiple sample processing. Room space utilization. The array rotary evaporator can be equipped with six mini rotary evaporator units, which can be used at the same time, but also supports independent operation. It can independently perform temperature setting, speed adjustment, and vacuum release, without interfering with the normal operation of other rotary evaporator units. .
