MIK3051 pressure transmitter Introduction: The MIK3051 series pressure transmitter utilizes the principle of differential capacitance detection. When the pressure on both sides is inconsistent, it causes displacement of the measuring diaphragm in the chamber. The displacement is proportional to the pressure difference, and the capacitance change is converted into a two wire current signal of 4-20mA through circuit processing. This transmitter has sturdy vibration resistance, continuously adjustable range, zero point, and damping on-site. Features: 1. Adopting imported capacitor chips, with an accuracy of more than 10 times that of ordinary cores 2. IP65 protection level, non-destructive testing, salt spray testing, dust prevention, spray prevention 3. Adopting 316L cast steel material and high-precision stainless steel structure, achieving an all solid state design 4. 20ms fast response, achieving zero error 5. Standard three wire wiring terminals, convenient wiring, firm installation, and stable measurement performance 6. Add shock and lightning protection devices to achieve 24-hour comprehensive protection Technical parameters: Product model: MIK-P3051 Range: 0-31MPa Output signal: 4-20mA, etc. Signal 1-5V/Hart, etc; Suitable media: gas, liquid, etc Material type: 316L stainless steel Temperature range: -25-85 ℃ Environmental conditions: temperature -10-55 ℃, relative humidity 5% -9% Power supply: 24VDC Accuracy level: Within 0.2% FS Protection level: ordinary type IP65, diving type IP68
Introduction: The MIK3051 series pressure transmitter utilizes the principle of differential capacitance detection. When the pressure on both sides is inconsistent, it causes displacement of the measuring diaphragm in the chamber. The displacement is proportional to the pressure difference, and the capacitance change is converted into a two wire current signal of 4-20mA through circuit processing. This transmitter has sturdy vibration resistance, continuously adjustable range, zero point, and damping on-site.
