MIK-P300Z negative pressure transmitter Introduction: The pressure sensitive core of the MIK-P300Z series vacuum pressure transmitter adopts a high-performance silicon piezoresistive pressure filled oil core. The dedicated integrated circuit inside converts the sensor millivolt signal into a standard voltage, current, or frequency signal, which can be easily connected to computer interface cards, control instruments, intelligent instruments, or PLCs. Long distance transmission can be achieved through current output. It has a small volume, light weight, and fully stainless steel sealing structure, which can work in corrosive environments. This product is easy to install and has excellent vibration and impact resistance. It is widely used in the measurement and control of liquids and gases in industries such as process control, aviation, aerospace, automotive, medical equipment, HVAC, etc. Features: 1. Multi range, multiple signal outputs optional 2. Adopting imported diffused silicon core, the stability exceeds that of ordinary diffused silicon by 200% 3. Adopting 316L stainless steel isolation membrane, corrosion-resistant 4. Strong anti-interference and good long-term stability 5. Equipped with triple protection - reverse protection, overvoltage protection, and overcurrent protection 6. Adopting international standard anti damping design, it can withstand 300% instantaneous impact Technical parameters: Product model: MIK-P300Z Range: -0.1... 0~0.02... 100Mpa (0-100Kpa) Output signals: 4-20mA, 1-5V, 0-10V, 0-20mA, 0-5V, RS485; Compensation temperature: -10-70 ℃ Medium temperature: -40-125 ℃ Environmental temperature: -10-70 ℃ Pressure type: gauge pressure, absolute pressure, sealing pressure Power supply: 24VDC Comprehensive accuracy: optional levels of 0.1, 0.3, and 0.5 Overload pressure: 200% FS Long term stability: ≤ 0.2% FS/year Natural frequency: 5KHz-650KHz Sensitivity temperature drift: ± 0.03% FS/℃ Zero temperature drift: ± 0.03% FS/℃ Shell protection: IP65
Introduction: The pressure sensitive core of the MIK-P300Z series vacuum pressure transmitter adopts a high-performance silicon piezoresistive pressure filled oil core. The dedicated integrated circuit inside converts the sensor millivolt signal into a standard voltage, current, or frequency signal, which can be easily connected to computer interface cards, control instruments, intelligent instruments, or PLCs. Long distance transmission can be achieved through current output. It has a small volume, light weight, and fully stainless steel sealing structure, which can work in corrosive environments. This product is easy to install and has excellent vibration and impact resistance. It is widely used in the measurement and control of liquids and gases in industries such as process control, aviation, aerospace, automotive, medical equipment, HVAC, etc.
