Introduction: Ultrasonic sludge interface instrument, also known as ultrasonic mud level meter, is a contact type, high reliability, cost-effective, easy to install and maintain mud level measuring instrument. It uses the liquid as the measuring medium to detect the distance from the sensor to the sludge surface to realize the detection of the underwater mud level. Technical Parameters: Basic model: MIK-JFC Range: 5 meters, 10 meters, 15 meters, 20 meters Accuracy: 1%~3% Resolution: 5mm Display: Chinese LCD Power supply: 24VDC (220VAC optional) Output: 4~20mA (RS485, relay optional) Sensor material: POM Installation Precautions: When selecting a sensor installation location, the following criteria need to be followed: (1) The sensor should be kept as perpendicular as possible to the mud surface and the bottom of the pool. (2) There should be no obstacles in the emission surface directly under the probe to avoid the ultrasonic signal being blocked and reflected by the obstacle. (3) The probe should be installed away from gas foam and active floating solids caused by sudden changes in flow rate to ensure accurate and stable measurement. (4) The probe should be installed away from the water inlet and outlet. (5) The sensor probe should be completely submerged in water and at least 50 cm from the wall of the tank. If the pool wall is not flat, you need to leave 100cm, or you need to adjust according to the actual situation on site. If the pool wall is uneven, or there are objects such as brackets and pipes, it is necessary to increase the distance from the wall to avoid interference from the above objects.
Introduction: Ultrasonic sludge interface instrument, also known as ultrasonic mud level meter, is a contact type, high reliability, cost-effective, easy to install and maintain mud level measuring instrument. It uses the liquid as the measuring medium to detect the distance from the sensor to the sludge surface to realize the detection of the underwater mud level.
