MIK-3051DP Double flange pressure and liquid level transmitter Introduction: The MIK-3051DP dual flange liquid level transmitter product utilizes the principle of differential capacitance detection. When the pressure on both sides is inconsistent, the measuring diaphragm in the chamber is displaced, and the displacement is proportional to the pressure difference. Through circuit processing, the capacitance change is converted into a 4-20mA two-wire current signal and sent to the secondary instrument to display the liquid level value. At the same time, the meter head can also display the liquid level value. This liquid level transmitter has sturdy vibration resistance, continuously adjustable range, zero point, and damping on-site. Application: Liquid level detection for liquids, gases, and vapors. Features: 1. LCD display screen: Adopting LCD large screen backlight display, the on-site reading is clearer 2 stainless steel shell: Made of 316L stainless steel joint and 316L stainless steel double diaphragm, it has long-term corrosion resistance and better contact. 3 imported sensing components: Imported sensing components are used internally, with a measurement accuracy of up to 0.075 level, and support for one click switching of multiple international units 4. Wide compatibility with media: Liquid pressures such as water and oil, as well as gas pressures such as air and steam, have viscosity and are prone to crystallization. They are compatible and have adjustable ranges, with a wide range. 5. High measurement accuracy: Imported sensing components are used internally, with a measurement accuracy of up to 0.075 level and strong anti-interference ability, effectively improving the accuracy and reliability of measurement. Technical parameters: Product model: MK3051DP Measurement parameters: differential pressure, liquid level Measurement range: Lower limit: Starting from 100% URL (continuously adjustable) Upper limit value: up to+100% URL (continuously adjustable) 2-wire system, 4-20mADC Hart output, digital communication, Output signal: The Hart protocol is loaded onto a 4-20mADC signal Output signal limit: lmin=3.9mA, lmax=20.mA Response time: The damping constant of the amplifier component is 0.1s; The time constant for sensors and remote transmission flanges is 0.2-6s (Depending on the sensor range, range ratio, capillary length, and viscosity of the filling liquid) Environmental temperature: Min: depends on the filling liquid Max: 85 ℃ When equipped with LCD display and fluororubber sealing ring, -20~65 ℃ Storage temperature/transportation temperature: minimum: depends on the filling liquid, maximum: 85 ℃ Relative humidity: 0-100% Impact resistance acceleration: 50g, duration: 11ms Anti vibration: 2g to 500Hz Medium temperature: 30-400 ℃
Introduction: The MIK-3051DP dual flange liquid level transmitter product utilizes the principle of differential capacitance detection. When the pressure on both sides is inconsistent, the measuring diaphragm in the chamber is displaced, and the displacement is proportional to the pressure difference. Through circuit processing, the capacitance change is converted into a 4-20mA two-wire current signal and sent to the secondary instrument to display the liquid level value. At the same time, the meter head can also display the liquid level value. This liquid level transmitter has sturdy vibration resistance, continuously adjustable range, zero point, and damping on-site. Application: Liquid level detection for liquids, gases, and vapors.
