MH-20 plastic friction and wear testing machine Introduction: This instrument is designed and manufactured according to GB3960-2016 "Test Method for Sliding Friction and Wear of Plastics", suitable for measuring the sliding friction and wear performance of composite materials such as plastics and rubber. Measure the friction force and friction coefficient of the sample. This instrument adopts microprocessor control, data processing, and micro printing Technical parameters: Sample size:+1.0-0.1 30 × seven × 6 ± 0.2+0.5-0.2 Transmission speed: 200 rpm ± 5% Load: 20KG ± 1% Friction ring: φ forty × 10mm HRC40~45 45 # steel chamfer 0.5 × The deviation of concentricity between the 45 ° outer circle surface and the inner circle is less than 0.01 Friction torque: 0-4N • m ± 2% Counter: 0-105 Microprocessor control, data processing, micro printing External dimensions: 610 × four hundred and fifty × 400mm Weight: 60kg Basic configuration: 1. One host 2. One torque sensor 3. A set of weights 4. One friction ring 5. One set of control system 6. One micro printer 7. Levers
Introduction: This instrument is designed and manufactured according to GB3960-2016 "Test Method for Sliding Friction and Wear of Plastics", suitable for measuring the sliding friction and wear performance of composite materials such as plastics and rubber. Measure the friction force and friction coefficient of the sample. This instrument adopts microprocessor control, data processing, and micro printing
