Sales MH-16 type particle sampler，Manufacturer

Position: Home > > Environmental monitoring and analysis > Air sampling equipment > Particulate sampler > MH-16 type particle sampler Membrane weighing method

MH-16 type particle sampler Membrane weighing method

Product ID：HQCYklw018

Price: Please inquire PDF Format

Supply Ability:20 SETS/MONTH

Port:SHENZHEN

Product Introduction
Other information

Model NumberMH-16

Brand NameQDMH

Payment TermsT/T, paypal

Introduction:
The instrument uses filter membrane weighing method to capture the inhalable particles (PM10) and fine particulate matter (PM2.5) in the ambient atmosphere. The instrument adopts imported high-load piston pump, constant current sampling flow rate of 16.67L/min, and after a long time a large number of The experiment can still meet the requirements of long-term trouble-free operation in the harsh field environment. It is a new small-flow particle sampler introduced by our company.
Executive standard
HJ 618-2011 Determination of Ambient Air PM10 and PM2.5 Gravimetric Method
HJ 93 -2013 "Technical requirements and test methods for ambient air particulate matter (PM10 and PM2.5) samplers"
Features:
1. Adopt high load brushless piston pump, strong load capacity and stable operation;
2. Instrument sampling can set timing, equal interval cyclic sampling;
3. Instrument sampling intelligent protection to ensure stable operation for a long time;
4. Low power consumption and low noise;
5. Can be reserved 0 - 7 days to start sampling at any time;
6. Automatically measure ambient temperature, atmospheric pressure, temperature before flow meter, pressure, calculate standard condition and working condition volume;
7. The sampling data is automatically memorized, power failure during the sampling process, and automatic call recovery;
The instrument has the function of preventing rain and snow, so as to avoid instrument damage caused by sudden precipitation when unattended;
8. OLED self-illuminating wide temperature screen, suitable for cold environment.
Technical Parameters:

The main parameters	Parameter range	Resolution	Accuracy
Flow range	(15～30)L/min	0.01 L/min	Better than ±2%
Temperature before flow meter	(-40～85)℃	0.1℃	Better than ±1°C
Flow meter pressure	（-45～0）kPa	0.01 kPa	Better than ±0.1kPa
Atmospheric pressure	(50～130)kPa	0.01kPa	Better than ±0.5kPa
Ambient temperature	(－40～85)℃	0.1℃	Better than ±1°C
Sampling method	Manual, automatic continuous cycle sampling
Load capacity	Load capacity >35kPa at 16.67L/min flow
Instrument noise	≤62dB(A)
Host size	(length 330 × width 220 × height 320) mm
Host weight	≤8.0 kg
Working power supply	AC220V±10%, 50Hz
Power consumption	≤50W