MFT-1000 Vacuum Attenuation+Pressure Attenuation Packaging Sealing Tester Introduction: The MFT-1000 packaging sealing is developed after our company's independently developed and produced MFT-900. MFT-1000 is suitable for testing the sealing integrity of pharmaceutical packaging to prevent product contamination by moisture, oxygen, and microorganisms. Pharmaceutical products: bottled, bagged, boxed, ampoule, penicillin bottle, cartridge bottle, pre filled needle (PFS), (BFS), (FFS), etc; characteristic: 1. Complies with USP<1207>, ASTM F2338 standards, and FDA standards 2. Semi automatic detection, suitable for small batch and multi variety testing; 3. Non destructive non-destructive testing, with precision, repeatability, and sensitivity; 4. Dual detection system: vacuum attenuation testing system, pressure attenuation testing system; 5. Based on different testing modes, provide the measured leakage rate and equivalent aperture; 6. Store the test results in a database for easy quality management; 7. Flexible information display, operating status, and testing curves to meet different process requirements; Technical parameters: Differential pressure sensor: ± 2kpa, error ≤ 0.5% F.S Differential pressure resolution: 0.1pa Test pressure sensor error: ≤± 1% F.S Test pressure range: -0.1~0.2MPa/-0.1~0.7MPa/-0.1~1.0Mpa Minimum detectable aperture: 1.5 μ m Display mode: 10 inch touch color touch screen Power supply voltage: AC100V-240V, 50/60Hz, power ≤ 200W Audit tracking: Store multiple event logs for ≥ 5 years, which can be queried based on time Permission management: username and password login, level 4 permissions, meeting FDA 21CFR PART 11 requirements, automatic screen lock, password unlock, Printing function: Built in micro printer History: ≥ 300000 groups Data backup: supports exporting data from USB flash drives Signal output: (4-20) mA, RS485, 12V alarm output Interface Ethernet: USB RS485 Length * Width * Height (mm): 430 * 655 * 420 (Height 1) * 330 (Height 2) (excluding the height of the robotic arm) Weight: 51kg
Introduction: The MFT-1000 packaging sealing is developed after our company's independently developed and produced MFT-900. MFT-1000 is suitable for testing the sealing integrity of pharmaceutical packaging to prevent product contamination by moisture, oxygen, and microorganisms. Pharmaceutical products: bottled, bagged, boxed, ampoule, penicillin bottle, cartridge bottle, pre filled needle (PFS), (BFS), (FFS), etc;
