MEGS_6C10K_FXGK_C8L Six Beam Underwater Obstacle Avoidance Sensor Introduction: Integrating six transducers with a circuit board can receive distance signals from six directions for underwater obstacle avoidance, underwater distance measurement, etc. Can be used to measure the internal shape of karst caves after drilling; Used for robots to walk in pipelines and measure the diameter and shape inside pipelines. characteristic: 1. Threaded installation and disassembly are convenient, with a 4-core shielded cable. 2. Five meter range, with a blind spot within 20 centimeters 3. High integration, with a diameter of 6 millimeters and a height of 80 millimeters. Technical parameters: Application: Underwater obstacle avoidance, underwater distance measurement Power supply: 10.8VDC~26VDC Blind spot:< 20cm Measurement accuracy: ± 0.5% (maximum range) Launch direction: flat regular hexagon, each side Communication: ModBus-RS485 standard protocol Range: 10m Environmental temperature:- 20℃~60℃ Protection level: IP68， Withstand voltage 150m Interface method: aviation plug connector or direct outgoing line Exploration cable: 4-core shielded cable Size: φ36mm*h80mm
Introduction: Integrating six transducers with a circuit board can receive distance signals from six directions for underwater obstacle avoidance, underwater distance measurement, etc. Can be used to measure the internal shape of karst caves after drilling; Used for robots to walk in pipelines and measure the diameter and shape inside pipelines.
