ME4-CO carbon monoxide sensor Introduction: The ME4-CO sensor is a constant potential electrolytic CO sensor. CO and O2 respectively produce corresponding Redox on the working electrode and the opposite electrode and release charges to form a current. The current generated is proportional to the CO concentration. The CO concentration can be determined by measuring the current. Widely suitable for carbon monoxide detection in industrial sites such as petroleum, petrochemical, metallurgical, mining, and environmental protection Features: 1. Low power consumption, high accuracy, and high sensitivity 2. Wide linear range and strong anti-interference ability 3. Excellent repeatability and stability Technical parameters: Detection gas: Carbon monoxide (CO) Range: 0-1000ppm Maximum measurement limit: 1500ppm Sensitivity: (0.080 ± 0.02) uA/ppm Resolution: 1ppm Response time (T90): ≤ 25s Bias voltage: 0mV Load resistance (recommended): 10 Ω Repeatability:<2% of output value Output linearity: linear Stability (per month): ＜ 5% Zero drift (-20 ℃ -40 ℃): 9ppm Temperature range: -20 ℃~50 ℃ Humidity range: 15-90% RH Pressure range: standard atmospheric pressure ± 10% Test life: 2 years (in air)
Introduction: The ME4-CO sensor is a constant potential electrolytic CO sensor. CO and O2 respectively produce corresponding Redox on the working electrode and the opposite electrode and release charges to form a current. The current generated is proportional to the CO concentration. The CO concentration can be determined by measuring the current. Widely suitable for carbon monoxide detection in industrial sites such as petroleum, petrochemical, metallurgical, mining, and environmental protection
