ME4-C2H3Cl Vinyl Chloride Sensor Introduction: The ME4-C2H3Cl sensor is a constant potential electrolytic C2H3Cl sensor. C2H3Cl and O2 have corresponding Redox on the working electrode and the opposite electrode and release charges to form a current. The current generated is proportional to the concentration of C2H3Cl. The concentration of C2H3Cl can be determined by the size of the test current. Widely suitable for the detection of vinyl chloride in industry and environmental protection. Features: 1. Low power consumption, high accuracy, and high sensitivity 2. Wide linear range and strong anti-interference ability 3. Excellent repeatability and stability Technical parameters: Detection gas: Vinyl chloride (C2H3Cl) Range: 0-20ppm Maximum measurement limit: 100ppm Sensitivity: (2.0 ± 1.2) uA/ppm Resolution: 0.5ppm Response time (T90): ≤ 60s Bias voltage: 300mV Load resistance (recommended): 10 Ω Repeatability:<2% of output value Stability (per month): ＜ 5% Output linearity: linear Zero drift (-20 ℃~40 ℃): ≤ 4ppm Temperature range: -20 ℃~50 ℃ Humidity range: 15 µ%~90 µ RH without condensation Pressure range: standard atmospheric pressure ± 10% Test life: 2 years (in air)
Introduction: The ME4-C2H3Cl sensor is a constant potential electrolytic C2H3Cl sensor. C2H3Cl and O2 have corresponding Redox on the working electrode and the opposite electrode and release charges to form a current. The current generated is proportional to the concentration of C2H3Cl. The concentration of C2H3Cl can be determined by the size of the test current. Widely suitable for the detection of vinyl chloride in industry and environmental protection.
