ME3-ETO ethylene oxide sensor Introduction: ME3-ETO electrochemical gas sensor is a constant potential electrolytic sensor. Ethylene oxide reacts with oxygen on the working electrode and the opposite electrode and releases charges to form a current. The current generated is proportional to the concentration of ethylene oxide. The concentration of ethylene oxide can be determined by measuring the current. Widely suitable for the detection of ethylene oxide in petroleum, petrochemical, pharmaceutical production, and environmental protection fields Features: 1. Low power consumption, high accuracy, and high sensitivity 2. Wide linear range and strong anti-interference ability 3. Excellent repeatability and stability Technical parameters: Detection gas: ethylene oxide (ETO) Range: 0-20ppm Maximum measurement limit: 100ppm Sensitivity: (1.8 ± 0.3) uA/ppm Resolution: 0.1ppm Response time (T90): ≤ 120S Bias voltage: 300mV Load resistance (recommended): 10 Ω Repeatability:<2% of output value Stability (per month): ＜ 2% Output linearity: linear Zero drift (-20 ℃~+40 ℃): 4ppm Operating temperature range: -20 ℃~+50 ℃ Humidity range: 15%~90% RH without condensation Operating pressure range: standard atmospheric pressure ± 10% Service life: 2 years
Introduction: ME3-ETO electrochemical gas sensor is a constant potential electrolytic sensor. Ethylene oxide reacts with oxygen on the working electrode and the opposite electrode and releases charges to form a current. The current generated is proportional to the concentration of ethylene oxide. The concentration of ethylene oxide can be determined by measuring the current. Widely suitable for the detection of ethylene oxide in petroleum, petrochemical, pharmaceutical production, and environmental protection fields
